EcoSmart ES50LVS Installation, Operation And Maintenance Manual - Dip
Manual is about: SELECT MULTI-SPEED AIR HANDLER
of
26
18 |
P a g e
DIP
SWITCH
OPTIONS
Switch Locations
Two DIP switches labelled CFM and OPTIONS are located on the top left section of the control board.
One switch is for Heat and Cool CFM rates, and the other for system options.
WARNING – to prevent damage, use a small screwdriver to change switch position.
Up is ON as marked on the switch body and each switch is identified with numbers below.
CFM – switches 1 and 2 set Heat CFM rate
CFM – switches 3 and 4 set Cool CFM rate
OPTIONS – sets various system parameters