ECOVACS Deebot D56 User Manual - page 14
10
Put the robot on the charging block and keep it charging after
finishing house cleaning.
Do not keep the robot on pause status for long time, because the full
charged battery could only last for around 20 hours. We suggest
you to turn it off when you do not want it to work.
Tips
:
Press btuuon, then robot
will follow the bellowing action.
6.Mode Selection
The details of three statuses mentioned as bellowing:
Working status: robot is doing cleaning job
Standby status:
Case one: press button but without any operation.
Case two: press button or any other button on host when robot is
running.
Case three: lift the robot.
Power off status: robot is not power on, or under working or standby
status, press button, robot is power off.
.
Status
instruction
:
Route description:
obstacle.
First robot going straight ahead, it turns when it meets
If robot detects that there is plenty of dust during the clean process. It
will take the fan-shaped or spiral route.
Under normal circumstance, it will take spiral route when it detects
plenty of large particles, and will take fan-shaped route when few of
small particles.
If take this mode, the cleaning coverage would reach maximum
compared by the same ground condition. We recommend this mode
when the ground is not too dirty and needs quick cleaning.
The clean can last 45 minutes under this mode, when it detects low
battery, the robot will go back charging.
0. 5M
12
mode
mode
Automatic Cleaning Mode
auto edge spot
return
intensive