ECOVACS DEEBOT M82 Instruction Manual

Other manuals for DEEBOT M82: Instruction Manual

Summary of DEEBOT M82

  • Page 1

    Instruction manual en.

  • Page 2

    2 en.

  • Page 3

    En 3 en.

  • Page 4: Contents

    En 4 en contents 1. Important safety instructions ......................................................................5 2. Package contents and technical specifications ...................................... 7 2.1 package contents ......................................................................

  • Page 5

    5 en when using an electrical appliance, basic precautions should always be followed, including the following: read all instructions before using this appliance. Save these instructions 1. This appliance is not intended to be used by children under 8 or anyone lacking knowledge on proper use. Superv...

  • Page 6

    6 en 1. Important safety instructions 22. Turn off the power switch before cleaning or maintaining the appliance. 23. The plug must be removed from the receptacle before cleaning or maintaining the charging dock. 24. Remove the appliance from the charging dock, and turn off the power switch to the a...

  • Page 7: 2.1 Package Contents

    7 en model dm82 working voltage 14.8v dc rated power 22w charging dock rated input voltage 19v dc rated output current 0.6a power adapter: gscv0600s019v12e input: 100-240v ac 0.5a 50/60hz output: 19v dc 0.6a remote control input voltage 3v dc battery lithium 2600mah 2.1 package contents robot cleani...

  • Page 8: 2.3 Product Diagram

    8 en 2. Package contents and technical specifications 2.3 product diagram robot 1 2 3 4 5 6 7 8 13 9 10 11 12 1. Anti-collision sensors 2. Auto mode button 3. Dust bin release button 4. Charging contacts 5. Battery cover 6. Driving wheels 7. Side power switch 8. Anti-drop sensors 9. Universal wheel ...

  • Page 9

    9 en 2. Package contents and technical specifications max am pm am pm 1. Current time display 2. Scheduled cleaning time display 3. Direction control buttons 4. Start/pause button 5. Time scheduling button 6. Max button press to: adjust current time and scheduled cleaning time. Turn the robot around...

  • Page 10: 3.1 Notes Before Cleaning

    10 en 3.1 notes before cleaning before operating deebot, take a few moments to survey the area to be cleaned and remove any obstacles. Remove power cords and small objects from the floor that could entangle the product. Please be aware that the robot needs at least an 8 cm (3”) clearance to clean un...

  • Page 11: 3.2 Quick Start

    11 en 3.2 quick start charging dock placement connect the power adapter to the charging dock. Place the charging dock on a level floor surface against the wall with the base perpendicular to the ground. Keep the immediate area 2m (6.6’) in front of the charger and 1 m (3.3’) on both sides of the cha...

  • Page 12: 3. Operating and Programming

    12 en 3. Operating and programming * dm82 can be directed to move forward, left and right, and turn around, by using the direction control buttons and max button on the remote control when it is paused. Dm82 does not clean when paused. * if dm82 is paused for more than 45 seconds it goes to sleep to...

  • Page 13: 3.3 Cleaning Mode Selection

    13 en auto cleaning mode this is the most commonly used mode. In auto cleaning mode, dm82 cleans in a straight line and changes direction when it meets an obstacle. 1 spot cleaning mode (1 minute) this mode is applicable for an area of highly concentrated dirt or dust. In spot cleaning mode, dm82 fo...

  • Page 14: 3. Operating and Programming

    14 en 3. Operating and programming max am pm am pm edge cleaning mode (up to 20 minutes) single room mode this mode is good for cleaning the edges and corners of a room. In edge cleaning mode, dm82 cleans along a border (e.G. Wall). This mode is used if dm82 only needs to clean a single room. Press ...

  • Page 15: 3.4 Programming The Robot

    15 en set the current time of day 1 3.4 programming the robot max am pm am pm am pm am pm max am pm am pm am pm am pm max am pm am pm am pm am pm dm82 has a time scheduling function. Dm82 can be programmed to automatically clean once per day, at a specific time even if nobody is at home. The current...

  • Page 16: 3. Operating and Programming

    16 en 3. Operating and programming max am pm am pm am pm am pm max am pm am pm am pm am pm max am pm am pm am pm am pm max am pm am pm am pm am pm am pm am pm press the time scheduling button on the remote control to schedule automatic cleaning. The “hour” in the first line on the screen flashes. Pr...

  • Page 17: 3. Operating and Programming

    17 en 3. Operating and programming 3.5 indicator light and alarm sounds indicator light alarm sounds if dm82 detects a problem, it emits alarm beeps and the auto mode button glows red. Note: if the problem persists, please turn off the side power switch then turn on to restart the robot. If this doe...

  • Page 18: 4.1 Dust Bin and Filters

    18 en press the dust bin release button and remove the dust bin from the rear of dm82. Hold the dust bin level and open the dust bin cover. Empty the dust bin. Before performing cleaning and maintenance on dm82, power off the robot and unplug the charging dock. Pull the two handles on the filter net...

  • Page 19: 4.3 Other Components

    19 en cleaning the main brush turn the robot over. Push the two tabs on the main brush cover to remove it. Remove the main brush. Use the provided cleaning tool to remove any hair tangled around the main brush. 4.2 main brush and side brushes cleaning the side brushes remove the side brushes with a ...

  • Page 20: 4. Maintenance

    20 en 4. Maintenance wipe the charging contacts and charging dock pins with the brush side of the provided cleaning tool to maintain their effectiveness..

  • Page 21: 5. Troubleshooting

    21 en please use this chart to troubleshoot common problems using dm82. No. Malfunction possible cause solutions 1 dm82 will not charge. Dm82 is not powered on. Move dm82’s side power button to the on position. Dm82 has not made a connection with the charging dock. Be sure that dm82’s charging conta...

  • Page 22: 5. Troubleshooting

    22 en 5. Troubleshooting no. Malfunction possible cause solutions 4 dm82 will not clean automatically at scheduled time. Time scheduling function is cancelled. Set time scheduling function as described in section 3.4. Dm82 is powered off. Power on dm82. The robot’s battery is low. Keep dm82 powered ...

  • Page 23

    Dm82-eu01-im2014r00