ECOVACS winbot 7 series Instruction Manual - page 14
Manual is about: Window Cleaning Robot
of
60
13
7.5 Cupule
●
The Cupule assembly is a basic part of the Winbot’s function and is located on
the bottom of the unit (see Product Diagram). After each use, inspect the
Cupule’s surface to make sure it is not dirty, torn or cut. Any debris that is stuck
to the surface must be carefully removed with a damp cloth to make it smooth
again.
●
The Cupule may need to be replaced if it becomes scratched or torn.
Additional Cupules can be ordered by calling Customer Service at
1-888-966-0895 or visit www.ecovacs.com.
TM
EN