Summary of WINBOT 930
Page 1
Instruction manual en.
Page 2
Congratulations on the purchase of your ecovacs robotics winbot! We hope it brings you many years of satisfaction. We trust the purchase of your new robot will help keep your home clean and provide you more quality time to do other things. Live smart. Enjoy life. Should you encounter situations that...
Page 3: Contents
1. Important safety instructions .......................................................................2 2. Package contents and technical specifications .......................................4 2.1 package contents.......................................................................................
Page 4
En en 2 1. Important safety instructions when using an electrical appliance, basic precautions should always be followed, including the following: read all instructions before using this appliance. Save these instructions 1. This appliance is not intended to be used by children under 8 or anyone lac...
Page 5
En en 3 1. Important safety instructions 24. Please dispose of used batteries according to local laws and regulations. 25. Do not incinerate the appliance even if it is severely damaged. The battery can explode in a fire. 26. The appliance must be used in accordance with the directions in this instr...
Page 6: 2.1 Package Contents
En en 4 2. Package contents and technical specifications 2.1 package contents 2.2 specifications model w930 working voltage 15v dc rated power 35w remote control input voltage 3v dc power adapter：wt1503000 input：100-240v ac 50/60hz 1.6a output：15v dc 3.0a * technical and design specifications may be...
Page 7: 2.3 Product Diagram
En en 5 remote control 1. Power cord 2. Handle 3. Status indicator light and start/pause button 4. Air release trigger 5. Cleaning pad plate 6. Squeegee 7. Cupule 8. Driving treads 9. Wheel sensor 10. Bottom status indicator light 11. Bottom power switch 12. Edge detection sensors 13. Cleaning pad 1...
Page 8: 3. Operating The Robot
En en 6 3. Operating the robot 3.1 notes before cleaning do not use winbot 9 on a framed window with frame smaller than 5mm (0.2"). If winbot 9’s status indicator light flashes green after powering on, the back-up battery requires charging. Keep winbot 9 plugged in to charge the back- up battery unt...
Page 9: 3. Operating The Robot
En en 7 3. Operating the robot 3.2 attach the cleaning pad 3.4 install the safety tether turn winbot 9 over and attach the cleaning pad to the velcro smoothly. Make sure the cleaning pad is placed exactly within its velcro area. A b c d d if winbot 9 is used to clean an outside window, the safety po...
Page 10: 3. Operating The Robot
En en 8 loop one end of the safety tether to end a on the robot power cord and tighten. Connect end a and end b and tighten. Loop the other end of the safety tether around the safety pod’s channel and pull it tight. 1 2 3 3. Operating the robot if the length of power cord restricts winbot 9’s moveme...
Page 11: 3.5 Place The Safety Pod
En en 9 3.5 place the safety pod 3.6 spray cleaning solution 3. Operating the robot the safety pod must be placed on the inside of the window. Press the safety pod firmly on the inside of the window being cleaned. Make sure the safety pod is attached securely in place. Winbot 9 should only be used w...
Page 12: 3. Operating The Robot
En en 10 3. Operating the robot 3.7 start plug in winbot 9 place on the glass power on 1 3 2 move the bottom power switch to the “ ” position. Winbot 9 is powered on when it beeps and the status indicator light flashes blue. Please ensure there is a 15cm (5.9”) clearance between the glass and obstac...
Page 13: 3.8 Pause
En en 11 3.8 pause pause winbot 9 during cleaning by pressing the start/pause button on the robot or on the remote control. Winbot 9 can be directed to move forward, backward, left and right using the direction control buttons on the remote control when paused. Winbot 9 will clean when direction con...
Page 14: 3.9 Stop
En en 12 remove winbot 9 power off move the power switch to the “o” position. Grasp winbot 9’s handle. Pull the air release trigger and remove winbot 9 from the window. Polish away any marks left on the glass from winbot 9’s removal with the provided finishing cloth. 1 2 3.9 stop when winbot 9 compl...
Page 15: 4. Maintenance
En en 13 4. Maintenance turn the robot over and remove the cleaning pad. Rinse the cleaning pad and allow it to dry completely before re-attaching it to the robot. Before performing cleaning and maintenance on winbot 9, move the bottom power switch to the “ o ” position and unplug it from the recept...
Page 16: 4. Maintenance
En en 14 4. Maintenance move the bottom power switch to the “ ” position. Inspect the driving treads by using the and buttons on the remote control. Stop the driving treads if dirt is seen on the treads. Move the bottom power switch to the “o” position. Clean any dirt on the driving treads with the ...
Page 17
En en 15 5. Status indicator light and sounds indicator description status indicator light flashes green back-up battery is low and is charging. Winbot 9 will not clean until the back-up battery is properly charged. Status indicator light flashes blue winbot 9 is powered on, suction motor is running...
Page 18: 6. Troubleshooting
En en 16 6. Troubleshooting no. Malfunction possible causes solutions 1 remote control does not work. Winbot 9 is cleaning. When winbot 9 is cleaning, only the start/ pause button works on the remote control. Pause winbot 9 by pressing the start/ pause button on the robot or remote control. Other bu...
Page 19: 6. Troubleshooting
En en 17 6. Troubleshooting no. Malfunction possible causes solutions 3 status light indicator glows red after it is powered on, or during cleaning. Interruption of electricity while winbot 9 was cleaning due to power failure, plug displacement, or loose connection to the power adapter. A. Connect w...
Page 20
Winbot 9s-000-im2014r01.