EcoWater ERO-375 User Manual - page 16
16
CHANGING THE REMOTE DISPLAY (Model HERO-375 Only)
CHANGING WHICH DATA ITEMS ARE DIS-
PLAYED IN THE STATUS SCREEN
The HERO-375 status screen on the remote (See Page
14) may be customized to turn on or off any or all of
the items listed below:
DATA ITEM
TDS* removal (%)
Filter life remaining (days)
Average daily use (gallons/liters)
Water dispensed** (gallons/liters)
*T
otal dissolved solids.
**
Water output through faucet since the last filter change,
not including water currently stored in tank.
To turn data items on or off:
1.
Press the remote’s LEFT (
) or RIGHT (
) buttons
to manually advance to the HERO-375 status screen.
2.
Press the remote’s SELECT (
) button to display
the
HERO-375
menu.
3.
Press the DOWN (
) button to scroll through the
menu until
Display data
is highlighted in a box.
4.
Press the SELECT (
) button to display the display
data screen.
5.
Press the DOWN (
) or UP (
) buttons to scroll
through the list of display data items. Items with a
check mark in the box next to them will be displayed
during normal operation.
6.
To select an unchecked display data item, make
sure the box next to the item’s name is highlighted (box
is black inside). Then press the SELECT (
) button.
The check mark will appear in the box.
7.
To un-select a checked display data item, make
sure the box next to the item’s name is highlighted (box
is black inside). Then press the SELECT (
) button.
The check mark will disappear.
8.
When selections are complete, exit this menu by
pressing the LEFT (
) button twice.
NOTE:
If you turn off all data items, there will still be a
status screen for the HERO-375 on the remote, but it
will be blank below the header.
CHANGING THE ORDER OF DATA ITEMS DIS-
PLAYED IN THE STATUS SCREEN
In addition to changing which data items the remote
displays during normal operation, the order of these
items may be customized, as follows:
1.
Press the remote’s LEFT (
) or RIGHT (
) buttons
to manually advance to the HERO-375 status screen.
2.
Press the remote’s SELECT (
) button to display
the
HERO-375
menu.
3.
Press the DOWN (
) button to scroll through the
menu until
Display order
is highlighted in a box.
4.
Press the SELECT (
) button to display the display
order screen.
5.
Press the DOWN (
) or UP (
) buttons to scroll
through the list of display data items. Stop when the
item you want to move is highlighted in a box.
6.
Press the SELECT (
) button. Arrows will appear
next to the item.
7.
Press the UP (
) or DOWN (
) buttons to move
the item higher or lower in the list.
8.
When the item is where you want it in the list,
press the SELECT (
) button. The arrows next to the
item will disappear.
9.
To move another item, return to Step 5. When fin-
ished moving items, press the LEFT (
) button twice.