Ecox EAEM Owner's Manual - page 11

11

REMOTE CONTROL

SPLIT AIR CONDITIONER

EAEM

Push the TIMER ON button, the remote control will show TIMER ON. the last set 

time for START operation and the signal "h" will be shown on the DIGITAL display 

area. You are now ready to readjust the TIMER ON to start the operation.

Push the TIMER ON button again to set the time you want to start the operation

Push the TIMER OFF button, the remote control will show TIMER OFF, the last set 

time for STOP operation and the signal "h" will be shown on the DIGITAL display 

area You are now ready to reset the time to STOP operation.

Push the TIMER OFF button again to set the lime you want to & stop the operation.

After setting the TIMER, there will be a one-half second delay before the remote 

control transmits the signal to the air conditioner. Then, after approximately another 

2 seconds, the signal "h" disappears and the set temperature will re-appear on the 

digotal display.

The setting time is relative time. That is the time set is based on the delay of the 

current time.

3.1

3.2

3.3

3.4

3.5

NOTE

Be sure there are no obstacles between the remote control and the receiver of 

indoor unit otherwise the air conditioner will not work.

Keep the Remote Control away from any liquids.

Protect the remote control from the high temperatures and exposure to radiation.

Keep the indoor receiver out of direct sunlight or the Air Conditioner may 

malfunction.

Keep Remote Control away from EMI (Electro-Magnetic Interference) supplied by 

other household appliances.

1

2

3

4

5

WARNING

Change the TIMER

To change the TIMER ON/OFF time. Just press the corresponding TIMER button 

and reset the time.

To cancel the TIMER ON/OFF setting just adjust the TIMER tome to 0.00.