Ectaco Partner EF400T Deluxe User Manual - Memory Check
ECTACO Partner
®
EF400T User's
Manual
21
Use:
• Í, Î to switch between hours and minutes
• A, P to specify AM or PM
• u, t to turn the alarm ON/OFF.
y
Press ENTER to save changes.
If turned on, the Daily alarm produces a signal at the set time.
y
Press any key to interrupt the Daily alarm beep (otherwise, the beep will
continue for 30 seconds).
Memory check
Instantly check the free memory status with this Setup option.
y
Enter the Memory check subsection to check the remaining free memory.
Data deletion
The Data deletion subsection gives you the ability to free up memory resources
by deleting records much faster than removing them one by one.
Set password
With no password set (default) all functions of the EF400T are freely accessible.
After a password has been set, the following sections may be locked against
unauthorized access: Telephones, Schedule, User’s dictionaries, PC
communication, Data deletion, Security mode, Set password.
To gain access to any of these sections in the locked mode, a valid password
must be provided.
y
Enter the Set password subsection.
y
Specify a password up to 8 characters in length. Press ENTER.
y
Retype the password for confirmation. Press ENTER.
9
Always remember your password. If you forget it, you will have to reset the
system, which will cause irrevocable loss of user data.
Changing the pas sword
y
Enter the Set password subsection. Input the current password. Press
ENTER.
y
Specify a new password. Press ENTER.