Edco DDG-9-I-0315 Operator's Instruction Manual - page 7
DDG-9-I-0315
7
301-638-3326 • edcoinc.com • sales@edcoinc.com
EQUIPMENT DEVELOPMENT COMPANY
GETTING STARTED WITH YOUR NEW GRINDER
This unit is intended for grinding horizonal, dry floors such as concrete, asphalt or steel surfaces.
NOTE: The above illustrations are viewing the Machine from the front bottom.
NOTE the direction of rotation.
LOADING TOOLS:
1. Move handle to transport position.
2. Lean the machine back on the handle to
expose the work area and load the proper
tools for your job. Electric machines should
be unplugged.
LOADING TOOLS:
Once all tools are in the proper position re-
turn the machine to the upright position.
Return handle to the operator position and
install dust containment ring around head.
The machine should only be operated
without the dust containment ring when
edge grinding near a wall. Remember if
you are using tools with PCD’s or Strip-serts
they have a leading edge and must be
loaded as such. Also, remember the disc
turns in the direction of arrow decal.