1. DL manuals
  2. Eddylight
  3. Flood Light
  4. LED PAR 36
  5. User Manual

Eddylight LED PAR 36 User Manual

Summary of LED PAR 36

  • Page 1

    Led par 36 user manual.

  • Page 2: 1. Introduction

    1. Introduction 2. Safety information 3. Dimensions and specifications 4. Main function 5. Rear panel display and operation 6. Instructions for manual programming 7. Master/slave control 8. Cable connection.

  • Page 3: 1. Introduction

    1. Introduction thank you for purchasing our led par 36 light. Please read these instructions carefully before operating to avoid any possible damage and accidents caused by misuse. The led par 36 light has a hydrodynamic aluminum shell. Three colors of high-brightness led lights (red, blue, green) ...

  • Page 4

    3. Dimensions and specifications voltage: 100-264 vac ~60hz power: 18w size: 118mm deep x 115mm wide x 197mm high net weight: 0.8 kg lamp type: (6) pc of ‘3-in-1’ high power 3w led’s lamp life: ~50,000-100,000 hours lamp angle: 25-45 degrees (produces a 5’ dia. Spot of light from a 10’ distance, wit...

  • Page 5: 4. Main Function

    4. Main function 5 channel mode: channel dmx value function notes 1 0-255 red dimming 0—100% 2 0-255 green dimming 0—100% 3 0-32 blue dimming 0—100% 4 0-255 no function 5 0-255 no function 9 channel mode: channel dmx value function notes 1 0-255 red dimming 0—100% 2 0-255 green dimming 0—100% 3 0-32...

  • Page 6

    5. Rear panel display and operation menu: access the menu or return to a previous menu option up: menu selection or parameter increments down: menu selection or parameter increments enter: select the current menu option 6. Instructions for manual programming menu items: • ”addr”: dmx mode (001-512) ...

  • Page 7

    • press menu repeatedly until “addr” • press up / down to select your desired address (ie. “d017”) • press enter to choose. Creating solid colors: (r, g, b) • press menu until “r”, “g” or “b” is selected. • press up / down until to change the number (brightness of that color) • press enter to choose...

  • Page 8

    7. Master/slave control the master functions as a master as long as it’s not in dmx mode (and ideally no cable plugged into the dmx input on the unit). It sends a signal to the slave through a dmx cable and synchronizes its settings to it. Do not use more than 20 lamps or 60m of dmx cable. The slave...