Eddylight LED PAR 36 User Manual - 1. Introduction
1. Introduction
Thank you for purchasing our LED PAR 36 light. Please read these
instructions carefully before operating to avoid any possible damage and
accidents caused by misuse.
The LED PAR 36 light has a hydrodynamic aluminum shell. Three colors
of high-brightness LED lights (red, blue, green) are used to create a wide
spectrum of colors. Each color can be independently dimmed, faded and
so on. It draws low power and is low weight. The DMX controls include
dimming, fade, strobe, gradual change and more. The unit is compatible
with the standard DMX 512 signal for external DMX control. Practical uses
of the product include dance halls, stage backgrounds, hotels, large-scale
performances, drapery uplighting and stage lighting.
Packing List
- LED PAR 36 light
- User manual
- Warranty card
2. Safety Information
- Please consult skilled service technicians for any repairs required
- Always disconnect from the power source before setting up, moving and
servicing
- Avoid direct eye contact to the light when in operation
- Make sure the power supply voltage is compatible with this light
- Before installation, please check the light’s fasteners and mechanical
structure is in good condition and not damaged
- The light is designed for indoor use, below 40 degrees celsius
- The fixture may be mounted in any position provided there is adequate
room for ventilation. Make sure there are no flammable and explosive
items within 0.5 meters.
- Please ensure the ground is always connected
3
www.eddylight.com
1-800-914-3538