Eddylight LED PAR 64 User manual

Summary of LED PAR 64

  • Page 1

    Led par 64 rgbaw led light dsy-lp-64-177 user manual.

  • Page 2: 1. Introduction

    1. Introduction thank you for purchasing our led par 64 light. Please read these instructions carefully before operating to avoid any possible damage and accidents caused by misuse. The led par 64 light has a hydrodynamic aluminum shell. Five colors of high-brightness led lights (red, blue, green, a...

  • Page 3

    3. Dimensions and specifications voltage: ac110v/220 vac frequency: 50-60 hz power consumption: 28 w lamp: 10mm x 177pcs led beam angle: 25 degrees net weight: 2 kg dimensions: 3 www.Eddylight.Com 1-800-914-3538.

  • Page 4: 4. Main Function

    4. Main function 5 channel mode channel dmx value function notes 1 0-255 red dimming 0—100% 2 0-255 green dimming 0—100% 3 0-255 blue dimming 0—100% 4 0-255 amber dimming 0—100% 5 0-255 white dimming 0—100% 6 channel mode channel dmx value function notes 1 0-255 red dimming 0—100% 2 0-255 green dimm...

  • Page 5: Channel

    9 channel mode channel dmx value function notes 1 0-255 red dimming 0—100% 2 0-255 green dimming 0—100% 3 0-255 blue dimming 0—100% 4 0-255 amber dimming 0—100% 5 0-255 white dimming 0—100% 6 0-255 master dimming 7 0-9 no function 7 10-200 strobe; speed 7 201-255 max strobe speed 8 0-15 no function ...

  • Page 6

    5. Rear panel display and operation dmx out dmx in menu up down enter led display selection buttons dmx input/output menu: access the menu or return to a previous menu option up: menu selection or parameter increments down: menu selection or parameter increments enter: select the current menu option...

  • Page 7

    Press enter to access the submenu. This process can be saved automatically, which means you will enter the menu mode saved previously when you activate the light next time. For example, if you want to choose dmx mode a001, operate as follows: • press menu, to go back to the main menu • press up / do...

  • Page 8

    7. Master/slave control the master functions as a master as long as it’s not in dmx mode (and ideally no cable plugged into the dmx input on the unit). It sends a signal to the slave through a dmx cable and synchronizes its settings to it. Do not use more than 20 lamps or 60m of dmx cable. The slave...