Eddylight LED PAR 64 User manual - 1. Introduction
1. Introduction
Thank you for purchasing our LED PAR 64 light. Please read these
instructions carefully before operating to avoid any possible damage and
accidents caused by misuse.
The LED PAR 64 light has a hydrodynamic aluminum shell. Five colors of
high-brightness LED lights (red, blue, green, amber, white) are used to
create a wide spectrum of colors. Each color can be independently
dimmed, faded and so on. It uses a power switch, draws low power and is
low weight. The built-in programs include dimming, fade, strobe, gradual
change and more. The unit is compatible with the standard DMX 512
signal for external DMX control. Practical uses of the product include
dance halls, stage backgrounds, hotels, large-scale performances,
drapery uplighting and stage lighting.
Packing List
- LED PAR 64 light
- User manual
2. Safety Information
- Please consult skilled service technicians for any repairs required
- Always disconnect from the power source before setting up, moving and
servicing
- Avoid direct eye contact to the light when in operation
- Make sure the power supply voltage is compatible with this light
- Before installation, please check the light’s fasteners and mechanical
structure is in good condition and not damaged
- The light is designed for indoor use, below 40 degrees celsius
- The fixture may be mounted in any position provided there is adequate
room for ventilation. Make sure there are no flammable and explosive
items within 0.5 meters.
- Please ensure the ground is always connected