The leader in bass amplification. Never compromise ™ ©05-09-2006 by u.S. Music corp. E den time traveler bass guitar amplifier covering model wt405 20 my favorite settings setting 1____________________________________________________ setting 2____________________________________________________ sett...
19 my favorite settings setting 1____________________________________________________ setting 2____________________________________________________ setting 3____________________________________________________ setting 4____________________________________________________ 2 bass guitar amplifier wt40...
3 the eden line of world tour amplifiers is the result of our research and development in combining high performance and compact size. Just as a skilled craftsman needs good quality tools that won't let him down on the job, so does a good musician. We hope you enjoy the tool we’ve created for you. H...
17 the magic smoke – few people realize just how much magic goes into creating great bass tone. It isn’t something you normally need worry about. Just have fun and leave all that to us. However – and this is very important – if you ever release the magic smoke from your amplifier this is indeed a ve...
5 compressor bypass – turning the compressor control off will disengage the compressor. Enhance control – called the “magic knob” by some, this complex control simultaneously boosts the very low bass, upper middle, and high frequencies while putting a dip in the lower middle frequencies. It is flat ...
15 you’re done. Go play. There you have it: a quick and easy process to help you get the perfect tone from your eden amplifier. As previously mentioned, it make take a few extra minutes the first few times you go through this, especially if you take the time to experiment with all the knobs and swit...
7 fuse requirements: usa @ 120 volts /60 hz – 5 amp, 5 x 20 mm gmc/t/slow blow europe @ 240 volts/50 hz – 2.5 amp, 5 x 20 mm gmc/t/slow blow important note: always use slow blow or time delay type fuses. Do not use fast blow fuses. Really important note: in order to operate properly anywhere other t...
13 note: don’t forget that you can disengage the entire tone control system by pushing the eq bypass switch. This is really neat thing that many users like to use when recording. Another note: if you plan on using the warmth circuit to get some extra grit in your sound, you may want to wait a minute...
9 the cooling system will automatically reset itself to full power as soon as the unit cools down to a safe operating temperature. Note: the d.I. Will continue to operate normally even when the amplifier is in thermal safety mode. Only the stage sound will be lost. Important note: excessive heat is ...
11 if you have disengaged the compressor as we suggested, the clip light will barely blink on your loudest notes when you reach clipping in the input stage. We recommend you decrease gain one or two clicks to ensure there is no clipping in the system. By the way, this is david’s favorite way to set ...
