Eminent EM6230 Instruction Manual - 2.0 Installing The Camera
4
|
ENGLISH
1.3 Major hardware components.
The major components on the front panel of the EM6230 are:
1. Lens –the focus of the lens is fixed.
2. IR LED – for the Infra-red lighting of the night mode.
3. Power jack – this is the place to plug in the power adapter. The power needed for
this EM6230 is 12V/1A, please make sure you are using the correct power
adapter.
4. Ethernet jack – this is the place to plug in the RJ45 Ethernet cable.
5. WiFi antenna jack – this is the place to mount the WiFi antenna
2.0 Installing the camera
A few short and simple steps are necessary to connect and assign the camera, and to
enjoy the use of the camera. Use the following steps to connect the camera.
2.1 Connecting the camera to your network using a
network cable
We advise to connect the camera first with a network cable. Once the camera works
correctly, you can use your wireless network.
1. Connect the camera to a power outlet using the supplied power adapter.
2. Connect the camera to your router or switch using the supplied network cable.