Eminent EM6230 Instruction Manual - Notebook (Windows).
6
|
ENGLISH
2.3 Installing the software and camera on a PC or
notebook (Windows).
Before you can view the video of the camera, you need to install the software ”e-
CamView” from the CD-ROM.
1. Insert the CD in the CD-ROM.
2. If auto-run is enabled the Wizard should start.
3. Run the wizard to install the application e-CamView.
4. The application is installed on the PC
5. Open “e-CamView”. (If prompted with a screen about the firewall click “always
allow”).
6. Click “Camera list” to add the camera
7. If the computer and the EM6230 is connected to the same network, the Camera
can be added by clicking “Open search tool”.
8. Click “Searching”
9. The devices are displayed with the Device ID in the search list. You add the
Camera to the device list by double clicking the device.
10. A new window will be displayed here you can change the name of the camera and
enter the password of the camera that is printed on the bottom label and press
“OK”
11. If the EM6230 is not in the same network as the computer you can add the
EM6230 manually by clicking “Camera list” followed by “Add” enter the username
“admin” and the “Device ID” in the UID field and enter the password (you can find
this information on the bottom label of the camera) press “OK”.
2.4 Adding the camera to a wireless network
There are 2 options to connect the EM6230 to your wireless network. First option is to
configure the settings by using the App. The second option is to use the software
installed on your PC (windows).
Note: The device will reboot if necessary you will hear a buzzing sound from the
speaker of the camera followed by calibration of the camera.
2.4.1 Connecting to Wi-Fi using the App.
1. Ensure the camera is connected to the network with a Ethernet cable.
2. Start the App “e-CamView”.
3. Select the “Camera settings” menu by pressing the arrow next to the camera you
would like to configure.
(if prompted Login with username: (default “admin”)
Password: (default “leave blank”)
4. Select “Wi-Fi settings”
5. A list of available wireless networks will be displayed.
6. Select the wireless network you want to connect to (if not displayed press “
”