User manual english version: 1.1 / december 2013.
2 contents 3 4 5 6/7 8 9 10 11 12/13 14 15 16 17 18 19/20 21 general information ....................................... The feddz schematic diagram ....................... Unpacking instructions ................................... Battery charging and mounting ..................... Handling and sto...
3 general information congratulations for choosing to view the world from a different angle, with a perspective of environmen- tal responsibility and conserving our resources. The quiet way into the future this handbook contains information on the proper use and maintenance of your new feddz. For yo...
4 license plate holder and mud guard led rear lamp with brake light and blinker adjustable seat storage compartment belt with closure rfid - digital start system adjustable rear mirror left digital display led front blinker led-front head lamp rear wheel hub drive electric motor rear suspension kick...
5 the feddz is delivered completely functional and ready to go. The plastic parts have been protected during the transportation with a plastic foil which can be easily removed. Please confirm that everything is present upon unpacking. Were the correct battery (eco/ premium) and a charger included? U...
6 to charge the battery you need a normal 230v-oulet having a 16a-fuse or circuit breaker. First, connect the dc-plug on the bike, then the plug into the elec- tric outlet. The dc-plug of the charger is magnetically and po- larity secured, i.E. It finds the correct position when turned in the connec...
7 the battery can be charged either while on the feddz or dismounted and where ever is conveni- ent. If still mounted on the bike, the bike should be turned off. To check how far the charging procedure is, you can turn on the feddz and check the main display to see how much time is still needed. To ...
8 handling and storage of the battery the battery of the feddz is delivered with a charge of approximately 20-30%. This should be sufficient for testing the proper function of the feddz after being unpacked with a short test drive, to detect any possible transportation damage. The next step should t...
9 after the first 10-12 km of driving, the disk brakes should be adjusted. They are then free of any dirt and can be used more forcefully once they have been adjusted. To adjust the brakes, the two screws found on the brake should be loosened, so that the unit sits loosely on the handle bar and has ...
10 on the left side of the handlebars you will find the controls for the horn and the left blinker. There is also a rearview mirror on the left hand side of the handlebar. The controls can be adjusted if needed by loosening the two screws. On the right hand side of the handlebar you will find the dr...
11 display and gauges speed display indicator (right) number of kilometres driven odometer battery display driving mode return the trip odometer to 000 by pushing the mode button found above the right blinker with the side stand in the extended position. This should be recognized on the speed displa...
12 to start the feddz one must first turn on the red po- wer switch. The display will become active, the head lamp turns on, as does the rear lamp. For your safe- ty these lights are always on when the bike is in use. On the display, the speed, battery charge level, trip odometer and the drive mode ...
13 for your safety, you cannot start the feddz when the kickstand is extended, since there is no motor noise and one could mistakenly press the accelera- tor. When the kickstand is extended and the main switch is on, the display will indicate „stand“. Attention: please do not sit on the bike when it...
14 you can manually adjust the suspension on the front fork by turning the abs suspension system to the left towards plus for a softer ride, or in the other direction (minus) for a harder ride. The rear suspen- sion has been given a standard setting and should only be adjusted by a professional serv...
15 your optimal seat position can be adjusted by loose- ning the allen screw below the seat and pulling the seat higher or pushing it lower. You have the perfect position when you sit comfortably on the feddz with your feet able to lightly reach the ground. Seat position adjustment.
16 the foot rests are already mounted on the rear wheel linkage. Here they are placed slightly to the rear given you a sporty position. In case you prefer a more relaxed leg position, you can later place the foot rest in the forward position where it also positioned a bit lower. Foot rests.
17 the feddz has a 26 inch (zoll) tire from schwalbe with the name „crazy bob“. These ties are available in all bike shops or can be ordered. Changing the tires can be performed by your feddz-service part- ner or in any reliable bike shop. The recommended tire pressure is 3-4 bar depen- ding on your...
18 procedure when not in use for a longer time period the following procedure should be used if the feddz will not be driven for a longer period of time (e.G. During winter or as a display bike). The battery should have a charge between 60-80%. Too much charge can cause the battery to age more rapid...
19 accessories and features: cargo storage 2 belts with closures on the storage space battery (eco or premium) battery charger high performance-led-headlamp from philips led rear light with integrated brake light led blinkers both in front and back display with data rfid - digital start system. Adju...
20 motor: rear wheel hub electric motor (brushless) normal power 2 kw / peak power: up to 4 kw speeds: 25 km/h oder 45 km/h torque: 60 nm 3 driving options, selected using handlebar controller batterie eco/premium: approximately 70 km driving range* (eco) approximately 110 km driving range* (premium...
21 emo-bike gmbh & co. Kg fabrikstrasse 15 88400 biberach an der riss germany tel: +49 (0)7351 53904001 fax: +49 (0)7351 53904009 info@emo-bike.De www.Feddz.De greenroad gmbh polan 32 9815 kolbnitz austria tel: +43 (0) 676 9755525 beratung@greenroad.At www.Greenroad.At contact and partners © copyrig...
