Emotiva BasX A-800 User Manual - Speaker Output Connections
Page 14
B
AS
X A-800 Multi-Zone Power Amplifier
Speaker Output Connections
Audiophile grade 5-way binding posts.
Power Supply
Linear power supply with heavy duty toroidal transformer.
Input Sensitivity (for rated power; 8 Ohm load)
700 mV.
Gain
Individual channel mode: 29 dB.
Bridged mode: 35 dB.
Input Connections
Unbalanced (RCA); one each per channel.
Unbalanced (RCA); one stereo pair for Bus Input.
Input Impedance
27 kOhms.
Trigger
Trigger Input: 5 - 12 V (AC or DC);
Trigger Output: 12 VDC; can drive any load up to 120 mA.
Power Requirements
115 VAC or 230 VAC @ 50 / 60 Hz (automatically detected).
Front Panel Controls and Indicators
Standby; push button (halo ring changes color to indicate Standby or On).
Status LEDs (8); blue.
Status LEDs change to flashing red to indicate a fault condition.
Rear Panel Controls
AC Power Switch; rocker switch (switches AC main power).
Power Mode; slide switch; selects Always On, Trigger, or Auto-On Mode.
Bus Switch; slide switch; (4) 1 per Zone; selects either the Bus or individual inputs for each Zone.
Bridge Switch; selects either individual channel or bridged amplifier operation.
Status LEDs switch; disables front panel Status LEDs.