Emotiva BASX PT-100 User Manual - Basx T-100 Front Panel

Page 8

BasX  PT-100 Stereo Preamp / DAC / Tuner

 BasX T-100 Front Panel

 1. Headphone Jack

Use this jack to connect a pair of high-quality headphones. 

Note: The Main Outputs are muted when headphones are inserted. 

Note: The intelligent level control on the PT-100 independently stores and remembers  the 

levels for your Main Outputs and your Headphones. When you unplug your headphones, your 

speakers will return to their previous level.

 2. Input Buttons

In normal operation, these buttons are used to select which Input to listen to. (They perform 

different functions when you’re in the Setup Menu; see the Setup Menu section for details.)

 3. Front Panel VFD Display

The large, bright, easy to read VFD display keeps you continually informed about the status of 

your PT-100. The brightness of the front panel display can be configured in the Setup Menu.

 4. Power / Standby Button

This button is used to toggle the PT-100 between Standby and On modes. The halo ring around 

the button will be illuminated amber when the PT-100 is in Standby mode, and blue when the  

PT-100 is On.

Note: The PT-100 will only operate when the AC Power Switch on the rear panel is On. When 

the AC Power Switch is turned On, the halo will illuminate amber; at which point pressing the 

Standby button will turn the PT-100 On.

 5. Volume Knob

In normal operation, this knob is used to control the Volume on the PT-100. (It performs slightly  

different functions when you’re in the Setup Menu; see the Setup Menu section for details.)

4

5

1

3

2

INPUTS

PT-100