Emotiva BASX PT-100 User Manual - Basx Pt-100 Remote Control

Page 12

BasX  PT-100 Stereo Preamp / DAC / Tuner

 BasX PT-100 Remote Control

ST/M

4

5

1

3

2

 1. Power Button

This button is used to toggle the PT-100 between Standby and On modes. 

Note: The Remote Control will only operate when the AC Power Switch on the rear panel of the 

PT-100 is On.

 2. Navigation Ring / Buttons

In normal operation, pressing the Left and Right arrows will switch Inputs on the PT-100, and 

the Up and Down arrows will raise and lower the Volume. When the Setup Menu is engaged, the 

arrows are used for menu navigation. 

 3. Menu Button

This button toggles the Setup Menu on and off.

 4. Mute Button

Press this button to mute the audio output on the PT-100; press it again to return the audio to its 

previous level.

 4. Stereo / Mono Button

Pressing this button when you’re using the Tuner on the PT-100 switches between FM Stereo and 

FM Mono. (Stations that are noisy or weak in Stereo often sound better when listened to in Mono.)

Note: The Stereo/Mono button ONLY affects the FM Tuner; it will NOT convert stereo audio 

signals from other inputs to monaural.