Emotiva SA-250 User Manual - Quick Start
Page 12
Quick Start
Quick Start
To get the most from your SA-250, we urge you to read the entire manual. If you just can’t wait to
listen to it, this section will cover the basics you need to get started.
• Find a secure location for your SA-250.
• Confirm that the Input Voltage Switch is set to the correct voltage for your area.
• Set the Gain switches for the correct gain to match your other equipment
(29 dB is typical for most consumer audio equipment).
• Set the Ground Lift switches as required
(if you don’t notice any hum either way, leave these in the Ground position).
• Connect your SA-250 to a signal source.
• Set the Input Select switches to the Inputs you’ve chosen.
• Connect your SA-250 to a set of speakers (4 ohm or 8 ohm) using reasonably heavy gauge
speaker wires (at least 18 gauge).
• Find some music you really like to listen to.
• Turn on the AC Power switch and turn up the volume a bit!
• Enjoy!
While you’re enjoying your SA-250, it would be a great time to read the rest of the manual to learn
more about it.