Emotiva XPA GEN3 User Manual - Xpa Gen3 Front Panel
of
28
Page 7
XPA Gen3
XPA Gen3 Front Panel
1. Status Display Window
This window houses the status LEDs.
Note: The Status LEDs can be disabled by the Status Indicator switch on the rear panel.
Note: The Status LEDs illuminate red during startup; blue in normal operation; and flash red to
indicate a channel fault.
Note: On the XPA Gen3, each channel has one corresponding Status LED, so the number of
Status LEDs on your XPA Gen3 will depend on the number of amplifier modules installed.
2. Standby Button
Press to switch the amplifier On; press again to return to Standby; the halo ring around the button
(and the “E” on the button) illuminate amber for Standby and blue for On.
Note: In order for the XPA Gen3 to operate, the rear panel AC Power Switch must first be
turned On.
1
2
G E N 3
STANDBY
FIVE