Emotiva XPA GEN3 User Manual - Rear Panel Controls

Page 18

XPA Gen3

Front Panel Controls and Indicators

Standby; push button (halo ring changes color to indicate Standby or On). 

Status LEDs; one per channel; blue. 

Status LEDs change to red to indicate a fault condition.

Rear Panel Controls

AC Power switch; rocker switch (switches AC main power). 

Status LEDs switch; disables front panel Status LEDs and dims Standby button halo. 

Input selector switches (one per channel); metal toggle switches; select between  

balanced and unbalanced inputs. 

Circuit Breaker; press button to reset circuit breaker.

Protection

The XPA Gen3 is protected against excessive operating temperature, shorted speaker 

connections, ground faults, and other common fault conditions.

Dimensions:

17” wide x 8” high x 19” deep (unboxed; including feet). 

17” wide x 7” high x 19” deep (unboxed; without feet). 

24-1/2” wide x 12” high x 24-3/4” deep (boxed).

Weight

XPA Gen3 (two channel): 

35.5 lbs (unboxed) 

XPA Gen3 (three channel):  39 lbs (unboxed) 

XPA Gen3 (four channel): 

42.5 lbs (unboxed) 

XPA Gen3 (five channel):  

46 lbs (unboxed) 

XPA Gen3 (six channel):   

49.5 lbs (unboxed) 

XPA Gen3 (seven channel):  53 lbs (unboxed)

* For boxed weight, add 5 lbs to the above weights