Emotiva XSP-1 User Manual - Specifications

Page 23

XSP-1

Specifications

Topology:

Fully differential signal path, with balanced inputs and outputs; all input switching via silver 

clad relay contacts; level control via digitally controlled analog resistor ladder network.  

Includes analog bass management, true processor loop, and home theater bypass 

functions.

Number of Channels:

2

Inputs:

Line level, balanced (XLR); 2 sets (stereo). 

Line level, unbalanced (RCA); 4 sets (stereo). 

Phono, MC or MM (RCA); 1 set (stereo, with ground terminal); 

switch selectable MC or MM; switchable input impedance for MC. 

Processor Loop Input, line level, unbalanced (RCA); 1 set (stereo). 

Home Theater Inputs, line level, balanced (XLR) or unbalanced (RCA); 

1 set (Left, Right, Sub).

Outputs:

Main Outputs, balanced (XLR) and unbalanced (RCA); 1 set (stereo); 

both balanced and unbalanced outputs are always active; 

(Main Outputs carry High Pass signal when bass management is engaged). 

Subwoofer Outputs, balanced (XLR) and unbalanced (RCA);  

1 set (Left Subwoofer, Right Subwoofer, Summed Subwoofer); 

both balanced and unbalanced outputs are always active; 

(Subwoofer Ouputs carry Low Pass signal when bass management is engaged). 

Processor Loop Output, line level, unbalanced (RCA); 1 set (stereo). 

Headphone; 1/8” stereo jack (front panel).

Bass Management:

Independently switchable; Low Pass and High Pass;  

each independently adjustable between 50 Hz and 250 Hz. 

Crossover slopes: 12 dB/octave.

High-Frequency and Low-Frequency Trims:

HF Trim inflection point: 4 kHz. 

HF Trim adjustment range: -3 dB to +3 dB @ 12 kHz in 1 dB steps. 

LF Trim inflection point: 200 Hz. 

LF Trim adjustment range: -3 dB to +3 dB @ 50 Hz in 1 dB steps.