Installation & operating manual einbau- & bedienungsanleitung 2- and 4-channel amplifiers ea 2-4-5 ch manual (edf)_2008.Indd 1 25.02.2008 17:29:48 uhr.
2 1. Design features 5 2. Connections & controls 6-11 2.1 front & rear panel connection & controls ea2160s/ea2260s 6-7 2.2 front & rear panel connections & controls ea4160s 8-9 2.3 speaker impedance & power wire info 10 3. Amplifier mounting 10 4. Wire routing 11 4.1 main power wires 11 4.1 rca & re...
3 1. Technischer aufbau/merkmale 15 2. EingÄnge & funktionen 16-20 2.1 eingÄnge & funktionen ea2160s/ea2260s 16-17 2.2 eingÄnge & funktionen ea4160s 18-19 2.3 lautsprecher-impedanz & powerkabel info 20 3. Montage des verstÄrkers 21 4. Verkabelung / elektrischer anschluss 21 4.1 haupt-stromkabel 21 4...
4 congratulations! And thank you for choosing this emphaser car audio amplifier! To maximize the performance of this amplifier and your car audio system install, we recommend that you acquaint yourself thoroughly with all capabilities and features of the emphaser amplifier model you have chosen. Ple...
5 1. Design features ■ car audio amplifier: this emphaser amplifier allows the crossover controlled amplification of satellite speaker systems, kickwoofers and subwoofer systems ■ integrated electronic crossover: the internal crossover section features indepen- dently selectable highpass or bandpass...
6 2. Connections & controls 2.1 front panel ea2160s/ea2260s 1 power led green “operation” led, signaling correct operation of the amplifier. 2 input gain control input level gain control potentiometer – to match the output voltage of the headunit’s rca line-outs to the amplifier input section. 3 hig...
7 2. Connections & controls 2.1 rear panel ea2160s/ea2260s 9 “output terminals” loudspeaker output terminal to connect the loudspeakers. 10 “gnd” power input terminal moulded direct power input terminals to connect the amplifier to the negative or ground wire of the vehicle. 11 “remote” input termin...
8 2. Connections & controls 2.2 front panel ea4160s 1 power led green „operation“ led, signaling correct operation of the amplifier. 2 input gain control 1/2-ch input level control for 1/2-ch amplifier section – to match the output voltage of the head- unit‘s rca line-outs to the amplifier input sec...
9 2. Connections & controls 2.2 rear panel ea4160s 12 speaker output terminals 1/2-ch and 3/4-ch output terminals to connect the speakers in stereo or bridged mode to the amplifier. 13 „gnd“ power input terminal terminal to connect the amplifier to the negative or ground pole of the car battery. 14 ...
10 2.3 speaker impedance & power wire info 3. Amplifier mounting attention! For your own safety, disconnect the negative battery terminal (gnd) or remove the main fuse in the positive power cable near the car battery, before you start any wiring work! Before you proceed to install this emphaser ampl...
11 4. Wire routing 4.1 main power wires run the positive main power cable („+12 v“) directly from the positive terminal of the car battery to the amplifier. For protection of your car audio system against electrical fire hazards, resulting from a short-circuit of the main power cable to chassis grou...
12 5. Crossover adjustments 5.1 selecting the operation mode you must select and set the appropriate operation mode before you can attempt any of the crossover frequency adjustments. This setting depends on the speaker system connected to the amplifier. Select the appropriate operation mode as follo...
13 5.4 subsonic/high pass crossover frequency adjustment when driving a subwoofer in bandpass (“bpf”) operation mode, you should also adjust the subsonic highpass frequency. This is done by adjusting the “hpf” potentiometer. This setting depends the size and the power handling of the installed subwo...
14 herzlichen glückwunsch! Wir danken ihnen, dass sie sich zum kauf dieses emphaser verstärkers entschieden haben. Damit sie die wiedergabequalität und die leistungsfähigkeit ihres verstärkers voll ausschöpfen kön- nen, möchten wir sie bitten, sich eingehend mit den möglichkeiten und technischen fea...
15 1. Technischer aufbau/merkmale ■ car audio verstärker: dieser verstärker dientzur realisierung eines einbaufreundlichen klangstarken und sehr leistungsfähigen car audio systems ■ subwooferpegelregelung über externe kabelfernbedienung: die im fond des fahrzeuges montierbare kleine fernbedienung er...
16 2. Eingänge & funktionen 2.1 front panel ea2160s/ea2260s 1 power led grüne “power” led; signalisiert den normalen betriebszustand der endstufe im eingeschalteten zustand. 2 regler eingangsempfindlichkeit eingangsempfindlichkeits-poti für die anpassung an die ausgangsspannung des steuergerätes. 3 ...
17 2.1 rear panel ea2160s/ea2260s 9 lautsprecher ausgangs-terminal lautsprecheranschlussterminal für den anschluss von lautsprechern. 10 „gnd“ power input terminal direkt-eingansterminal für den anschluss an die chassis-masse des kfz’s, oder den minuspol der fahrzeugbatterie. 11 „rem“ input terminal...
18 2.2 front panel ea4160s 1 power led grüne “power” led; signalisiert den normalen betriebszustand der endstufe im eingeschalteten zustand. 2 regler eingangsempfindlichkeit 1/2-ch eingangsempfindlichkeitsregler der kanäle 1/2-ch, zur anpassung an die ausgangsspannung des steuergerätes. 3 regler hoc...
19 2.2 rear panel ea4160s 12 lautsprecher ausgangs-terminal lautsprecheranschlussterminal für den anschluss von lautsprechern. 13 „gnd“ power input terminal direkt-eingansterminal für den anschluss an die chassis-masse des kfz’s, oder den minuspol der fahrzeugbatterie. 14 „rem“ input terminal eingan...
20 2.3 lautsprecher impedanz & kabelinfo die wärmekapazität der kühlrippen dieser endstufenlinie wurde für niederohmige lasten ausgelegt. Die minimale abschlussimpedanz des jeweiligen verstärker modells entnehmen sie bitte den techni- schen daten. Die angegebenen impedanzen für stereo und gebrückten...
21 achtung! Entfernen sie zu ihrer eigenen sicherheit erst das massekabel von der batterie! Bei allen nachfolgend beschriebenen installationsschritten muss der stromkreis des kraftfahrzeugs unterbrochen sein! Erst nach abschluss aller installationsarbeiten wird über das massekabel der stromkreis wie...
22 4.2 cinch- & remote kabel verlegen sie das oder die cinchkabel, das fernbedienungskabel für die pegel-regelung von den kanälen die den subwoofer treiben und das remote-kabel vom steuergerät zur endstufe. Diese kabel sollten unbedingt räumlich getrennt von der stromzuführung des verstärkers eingez...
23 5.2 hochpass trennfrequenz mit der einstellung der trennfrequenz des hochpasses („hpf“) soll eine elektrische und mechanische entlastung der verwendeten koax oder komponentensysteme erfolgen. Je nach der vorhandenen membranfläche und nennbelastbarkeit der verwendeten (satelliten)-systeme empfiehl...
24 5.5 anpassung der eingangsempfindlichkeit die korrekte eingangsempfindlichkeitseinstellung ist wichtig für die ausnutzung des optimalen dynamikspielraumes ihrer steuergerät/verstärker/lautsprecherkombination. Diese empfindlichkeits- einstellung beeinflusst das grundrauschen ebenso wie die verzerr...
25 6. Technical specifications/technische spezifikationen ea2160s ea2260s ea4160s 2-channel amplifier 2-kanal verstÄrker 160w x 2 @ 4 ohms ( 160w x 2 @ 4 ohm ( 260w x 2 @ 2 ohms ( 260w x 2 @ 2 ohm ( 510w x 1 @ 4 ohms ( 510w x 1 @ 4 ohm ( 2 ohms stable / 4 ohms stable in bridged mode 2 ohm stabil / 4...
26 dear customer please read the warranty specifications below carefully. Should your emphaser product require warranty service, please return it to the retailer from whom it was purchased or the distributor in your country. Please do not send any product to emphaser inc. U.S.A. Should you have diff...
27 8. Warranty card/garantiekarte limited warranty: 24 months (valid with authorized installation approval only) dealer’s address & stamp ❏ installed by authorized dealer installation date: inspected and approved by: installation approval ❏ self-installed by customer emphaser inc., wyoming, michigan...
Emphaser inc., wyoming, michigan, u.S.A. Ea 2-4-5 ch manual (edf)_2008.Indd 28 25.02.2008 17:29:55 uhr.