EMPHASER EA2160S Installation & Operating Manual - page 25
25
6. TECHNICAL SPECIFICATIONS/TECHNISCHE SPEzIFIKATIONEN
EA2160s
EA2260s
EA4160s
2-CHANNEL AMPLIFIER
2-KANAL VERSTÄRKER
160W x 2 @ 4 ohms (
160W x 2 @ 4 Ohm (
260W x 2 @ 2 ohms (
260W x 2 @ 2 Ohm (
510W x 1 @ 4 ohms (
510W x 1 @ 4 Ohm (
2 ohms stable / 4 ohms stable in bridged mode
2 Ohm stabil / 4 Ohm stabil gebrückt
Integrated variable highpass filter: 10 - 300Hz with 12dB/oct. Integriertes variables Hochpassfilter: 10 - 300Hz mit 12dB/
Integrated variable lowpass filter: 30 - 300Hz with 24dB/oct.
Integriertes variables Tiefpassfilter: 30 - 300Hz mit 24dB/Okt.
Variable input sensitivity: 0.3 - 7V
Variable Eingangsempfindlichkeit: 0.3 - 7V
Damping factor @ 4 ohms: > 350
Dämpfungsfaktor an 4 Ohm: > 350
Signal to noise ratio: > 85dB
Signal-Rauschabstand: > 85dB
Remote low pass level remote control
Externe Basspegel-Fernbedienung
20mm² direct power input terminals
20mm² Strom-Anschluss Terminals
Dimensions WxHxD: 430 x 78 x 255mm
Dimensionen BxHxT: 430 x 78 x 255mm
4-CHANNEL AMPLIFIER
4-KANAL VERSTÄRKER
160W x 4 @ 4 ohms (
160W x 4 @ 4 Ohm (
220W x 4 @ 2 ohms (
220W x 4 @ 2 Ohm (
440W x 2 @ 4 ohms (
440W x 2 @ 4 Ohm (
2 ohms stable / 4 ohms stable in bridged mode
2 Ohm stabil / 4 Ohm stabil gebrückt
Integrated variable highpass filter: 10 - 300Hz with 12dB/oct.
Integriertes variables Hochpassfilter: 10 - 300Hz mit 12dB/Okt.
Integrated variable lowpass filter: 30 - 300Hz with 24dB/oct.
Integriertes variables Tiefpassfilter: 30 - 300Hz mit 24dB/Okt.
Variable input sensitivity: 0.3 - 7V
Variable Eingangsempfindlichkeit: 0.3 - 7V
Damping factor @ 4 ohms: > 250
Dämpfungsfaktor an 4 Ohm: > 250
Signal to noise ratio: > 85dB
Signal-Rauschabstand: > 85dB
20mm² direct power input terminals
20mm² Strom-Anschluss Terminals
Dimensions WxHxD: 555 x 78 x 255mm
Dimensionen BxHxT: 555 x 78 x 255mm
2-CHANNEL AMPLIFIER
2-KANAL VERSTÄRKER
280W x 2 @ 4 ohms (
280W x 2 @ 4 Ohm (
460W x 2 @ 2 ohms (
460W x 2 @ 2 Ohm (
620W x 2 @ 1 ohms (
620W x 2 @ 1 Ohm (
930W x 1 @ 4 ohms (
930W x 1 @ 4 Ohm (
1250W x 1 @ 2 ohms (
1250W x 1 @ 2 Ohm (
1 ohms stable / 2 ohms stable in bridged mode
1 Ohm stabil / 2 Ohm stabil gebrückt
Integrated variable highpass filter: 10 - 300Hz with 12dB/oct.
Integriertes variables Hochpassfilter: 10 - 300Hz mit 12dB/Okt.
Integrated variable lowpass filter: 30 - 300Hz with 24dB/oct.
Integriertes variables Tiefpassfilter: 30 - 300Hz mit 24dB/Okt.
Variable input sensitivity: 0.3 - 7V
Variable Eingangsempfindlichkeit: 0.3 - 7V
Damping factor @ 4 ohms: > 250
Dämpfungsfaktor an 4 Ohm: > 250
Signal to noise ratio: > 85dB
Signal-Rauschabstand: > 85dB
Remote low pass level remote control
Externe Basspegel-Fernbedienung
50mm² direct power input terminals
50mm² Strom-Anschluss Terminals
Dimensions WxHxD: 590 x 78 x 255mm
Dimensionen BxHxT: 590 x 78 x 255mm
EA 2-4-5 CH Manual (EDF)_2008.indd 25
25.02.2008 17:29:54 Uhr