EYEZONE B1080PX-2 User Manual - page 14
27
9. HTTP COMMAND FUNCTION
Confirm that the B1080PX-2 is already connected to the network. (refer to 7.1)
Confirm
the
“
Local HTTP Server
” function has been enabled, and the “
Local HTTP Server
Setup
” set has been completed (refer to 7.2).
Set your router or firewall, and open a port 80 for the B1080PX-2. The following figure is an
example, please refer to your user’s manual of router for opening ports.
Start IE Browser on PC and type the HTTP site or IP:
In the local PC, please type “http://192.168.1.100”.
In the remote PC, please type “http://61.30.13.40:80”.
Type the “User Name”, “Password” and click “OK” to log on.
(Default User Name:
root
Default
Password:
admin)
There are five items: “Control”, “Network”, “Server”, “Time” and “Features”
28
9.1 CONTROL
Control:
Select
one of the control commands, and press the “Send” to control the B1080PX-2
immediately.
-
Stop:
Stop playback
-
Play:
Start playback.
-
Pause:
Pause the playback.
-
Prev:
Play the previous file.
-
Next:
Play the next file.
-
Volume:
Adjust the volume.
Autoplay:
Select the auto play mode.
-
Enable:
Enable or disable the auto play function.
-
Movies:
Auto play movie files on the CF card after power on.
-
Pictures:
Auto play picture files on the CF card after power on (slideshow function).
-
All:
Auto play all the media files on the CF card after power on.
-
Multi Layer:
Directly execute Multiple Display function after power on (only for B1080P-3/ -4/ -5)
-
HDMI
In:
Auto play the video from HDMI source after power on (only for B1080PX-3/ -4/ -5).