1 eyezone b1080px-2 user manual j u l 2 9 , 1 0 2 fcc notices it’s herewith confirmed to comply with the requirements of fcc part 15 rules. Operation is subject to the following two conditions: z this device may not cause harmful interference. Z this device must accept any interference received, inc...
3 contents 1. Package contents……………………..……………………….. 4 2. Introduction……………………………….……………………... 4 3. Features………………………………………….……………… 5 4. Hardware overview…………………..………………………... 6 5. Remote control…………………………..…………………….. 7 5.1 entering text or ip address…………..…………………… 7 6. Start the b1080px-2…..……………….…...
5 3. Features high-performance and high stability: with the same resolution and bit rate as blu-ray players’. The source of hd wmv9 mp@hl (main profile / high level) supports resolution up to 1920x1080 (1080p) and the maximum bit rate is 40mbps. Supports multiple file formats: wmv9 and wma. Supports...
7 5. Remote control 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 power on/ off select the output mode numeric key delete last entry select a function or to play the selected file open the setup menu mute sound osd display function on/ off auto-play function on/ off mute sound volum...
9 7. Setting up in the main menu, using the “ ▼ ” button on remote control to select the “ setup ” item, and then press the “enter” button. You will be presented with the b1080px-2 settings screen. You can also press the “ setup ” button on remote control to directly open the settings screen. (if th...
11 7.1.2 setting the network from the ip detect tool with the bundle tool “ip detect”, user could search b1080px-2 on the local area network. User could also change the ip setting via this tool. For example, user might assign a static ip to b1080px-2 by the steps as below: step1: insert the driver c...
13 step6: the default ip mode of b1080px-2 is dhcp. User should change the mode to “manual”, if he wants to assign a static ip address to b1080px-2. Then enter the preferred “ip”, “net mask” and “gateway” in the “network setting”. Finally, click on the “setup” button for completing the setting. Note...
15 note: gmt and applied regions time zone region time zone region (gmt-12:00) eniwetok, quazalen (gmt+02:00) helsinki, riga, tallinn (gmt-11:00) midway, ireland, samoa (gmt+03:00) nairobi (gmt-10:00) hawaii (gmt+03:00) moscow, saint petersburg, volgograd (gmt-09:00) alaska (gmt+03:00) baghdad (gmt-...
17 7.4 other setup play osd display: enable or disable the osd display. Auto play movies: auto play movie files on the cf card after power on. Pictures: auto play picture files on the cf card after power on (slideshow function). All files: auto play all files (movie and picture files) on the cf card...
19 8. Using the b1080px-2 8.1 play media files on the cf card step 1: insert the cf card with media files, then turn on the b1080px-2 and press the “enter” button on the remote control when “’mnt/cf” is highlighted to take you into the cf card. Step 2: select the type of data (video/ audio/ pictures...
21 pause/step: pause the playback or play frame by frame. Zoom: zoom in/ out on the movie or picture. Original size first press : zoom 01 second press : zoom 02 third press : zoom 03 22 8.2 ftp auto download function step1: use the “notepad” to create a commands file on your pc as shown below (you c...
23 item description [file] 001.Mpg 002.Mpg 0.Png 1.Png schedule.Ini message1.Txt enter the filename you want to download. Note: the length of file name and extension cannot exceed 20 characters. The file schedule.Ini is created by the schedule maker software. (refer to section 10) the file message1....
25 8.3 rs-232 function (rs-232 cable is optional) step1: using the rs-232 cable (optional) to connect the b1080px-2 to your pc. Step2: make sure the rs232 function is enabled (refer to section 7.4). Step3: use the tool “tera term” or other tools to control the b1080px-2 with ascii command. - the ava...
27 9. Http command function confirm that the b1080px-2 is already connected to the network. (refer to 7.1) confirm the “ local http server ” function has been enabled, and the “ local http server setup ” set has been completed (refer to 7.2). Set your router or firewall, and open a port 80 for the b...
29 9.2 network network - enable: enable or disable the network function. - interface: select your network connection ethernet (wired) or wireless. General setup - enable dhcp: enable or disable the dhcp function. - ip/ subnet/ gateway/ dns server: enter the fixed ip address, subnet, gateway and dns ...
31 9.4 time ntp server - enable: enable or disable the ntp server function. - gmt server: enter the ntp server ip address like: 66.187.233.4. - time zone: set the time zone of your location. 32 9.5 features web interface - enable: enable or disable the http command function. - port: enter the port o...
33 10. Schedule function note: the “ntp server” or “local time” must be set before using the schedule function. (refer to 7.2) 10.1 install the schedule software step1: insert the driver cd into your cd-rom drive, then the autorun function will start up the shell program. If the autorun window does ...
35 modify: click this button to modify the file in the list. Z select the file that you want to modify in the list, and press the “ modify ” button. Remove: click this button to remove the file from the list. Z select the file that you want to remove from the list, and press the “ remove ” button to...
37 step 2: click the “add” button in the “file setup” section to open the “schedule file editor” window. Click the “browser” button to select a file that you want to play. You can also set up the “play times” of the file in the window. Click the “ok” button to complete the setup. Step 3: repeat the ...
39 11. Optional auxiliary equipment 11.1 play-button box the play button box supports up to 12 play-button inputs. Press one of the play buttons to play the corresponding file. Hardware connection play the media file by the play-button ex. 5 play-buttons (supports up to 12 play buttons) step 1: put ...
41 11.2.3 connect to the touch-sensor buttons open the battery cover and set the batteries (aa size) as shown below. Please note that the polarity of the battery. 11.2.4 play the demo files step 1: insert the cf card to the b1080px-2, and the b1080px-2 will play the default file automatically while ...