EZCast 5G Quick Start Manual - page 5
Manual is about: wi-fi
of
9
Step 3: If your EZCast dongle has no connection
with a WiFi AP Router, you may see the AP setting
page below. Please select appropriate AP, and enter
password correspondingly, by using “Control Pad”
on your device.
Note: You may switch between 2.4GHz and 5GHz
on this page. EZCast dongle may reboot once you
change the frequency band, please reconnect with
your dongle if necessary.
!
Step 4: After EZCast dongle connected to Internet, it
will inquire the firmware version from EZCast server. If
a new version is found, a firmware upgrade
procedure will start automatically as below.
!
Note: Please DO NOT power off or unplug your