1 usata 900 / usata 1000 blu-ray/dvd/cd duplicator user ’s manual.
2 copyright © 2015. All rights reserved table of content i. Introduction ..................................................................................... 5 1. Features ......................................................................................... 5 2. Lcd front panel overview ..........
3 10.7 system information ............................................................. 15 10.8 update bios ...................................................................... 15 10.9 copy counter ..................................................................... 16 10.9.1 show count ............
4 12. Hdd manager ............................................................................... 23 12.1 select image ...................................................................... 23 12.2 disc => image .................................................................... 23 12.3 image infor...
5 i. Introduction thankyouforpurchasingthe duo and or duo plusblu-ray/dvd/cdduplicator.This duplicatorisspecificallyengineeredtorunstand-alonewithout additionalcomputer. Withasimple four-buttoninterface and a usb shortcut button, theduo/duo plus duplicator provides a fast and reliable solution for c...
6 duo plus ▼button:down, forward:to navigate forward in the menu. ▲button: up, backward: to navigate backward in the menu. Ent button:enter, ok: execute the function. Esc button:escape, cancel: go back to the previous level in the menu. Usbbutton: a shortcut to copy from a usb flash drive to disc(s)...
7 3. Specifications model duo / duo plus blu-ray/dvd/cd duplicator target duo:up to 11 target duo plus:up to 10 (usb port is excluded) operation standalone(nopcorsoftwareis required) supported format for disc dvd rom, dvd-r, dvd-rw, dvd+r, dvd+rw, cd-da, cd rom, cd-r, cd-rw, multi-session photo cdt,...
8 ii. Warning 1. The green led flashesduring the execution process of a task. After the task is done, the green led will stay solidif the process is successful, otherwise the red led will be on if the process is failed. 2. Do not turn off the duplicator machineor remove the optical drive when the ta...
9 1.2 usb to disc this copy mode will copy the data from the master usb drive to alltargetdiscs in the writer drives.Only the available data will be copied.Most of the file system formats are supported,includingwindows fat16, fat32, exfat, ntfs; linuxext2, ext3, ext4; mac hfs, hfs+. In order to allo...
10 1. This function is only available on duo plusblu-ray/dvd/cdduplicator. 2. The original data content of target usb drive will be erased after the copy process. Please make sure the data can be erased before copy. 2. Test this command will simulate the copy process and make sure all target discs a...
11 this command will perform the copy process, and immediately follow with a comparison between the master disc and the copied disc(s) automatically to ensure the copies are the exact duplicates of the master disc. This command is especially useful for bds, dvds, data cds and video cds. Note: 1.The ...
12 7. Set burn speed this command allows to set the burn speed for various types of disc: cds (data and vcds), audio cds, dvds, dual-layer dvds (dvd dl), and blu-ray (bd-r sl, bd-r dl, bd-re sl, and bd-re dl). Selectable burn speeds: cd: 1, 2, 4, 8, 10, 12, 16, 20, 24, 32, 36, 40 (default), 44, 48, ...
13 press ▲▼ to select track track 1 is selected press ▲▼ to select track track 5 is selectedpress ▲▼ to select start copy track 1 first copy track 5 after track 1 is copied note: press ▲▼ to check the disc information 1. The function can be executed again if the target disc has free space. 2. Please...
14 10. Utility 10.1 prescan it will pre-scan the master disc and verify the integrity and quality of the master disc. Execute this function before the copy process starts, itwill ensure the master disc can be copied in the duplicator if the result is passed. 10.2 quick erase performs a quick erase o...
15 press ▲▼ to select the disc 10.6 drive information checks the make, model, and firmware of the drive(s) that are built in and connected to the duplicator controller ports. Press ▲▼ to select the drive 10.7 system information checks the model number, buffer memory and firmware version of the dupli...
16 10.9 copy counter it keeps track of the numbers of successful and failed copies made by the duplicator for cds and dvds. There are three options: show count (to display current copy counter), enable counter (to turn the counter on or off) and clear counter (to clear counter). 10.9.1 show count th...
17 11.2 auto start it sets the amount of time before the duplicator automatically start the selected command, ranging from off (no auto start) to 120 seconds. Press ▲▼ to select time 11.3 display mode it changes the display readout during the performance of various commands. “basic” mode displays a ...
18 eject targets only: duplicator will only eject target drive trays. Eject source only: duplicator will only eject source drive trays. Press ▲▼ to select option 11.6 reader speed sets the reader speed for the duplicator to read the master disc(s). Selectable reader speeds: cd: 1, 2, 4, 8, 10, 12, 1...
19 11.9 language selects the language for the display. Available languages are: english (default), spanish, portuguese, and japanese. Press ▲▼ to select language 11.10 clear setup resets the duplicator back to factory default settings. Press ▲▼ to select option 11.11 advance setup 11.11.1 power on t...
20 duplicator system.If disable is selected, no password will be set and the display will go back to the setup sub-menu.If enable is selected, a password must be entered using the following guidelines:u se ▲▼ to select the character desired.There are total 6 characters (positions) for the password. ...
21 11.11.6 copy upc/isrc allows to copy the upc/isrc on the master disc to the target disc(s). Press ▲▼ to select setting 11.11.7 copy cd+g allowsto copy cd+g files on the master disc to the target disc(s). Press ▲▼ to select setting 11.11.8 auto erase allows to erase files on the rewriteable cd’s o...
22 optimization: duplicator will automatically generate an optimized place and burn the break point. Press ▲▼ to select setting 11.11.11 show result time allowsto show the total result timeon display. Press ▲▼ to select setting 11.11.12 performance allows to set burning priorities based on performan...
23 12. Hdd manager this command is for the management of the hard disk drive (hdd) installed in the duplicator. Note: this feature is only available on duplicators with a hdd installed. If there is no hdd present in the duplicator, this feature will not show in the menu of commands. 12.1 select imag...
24 12.4 rename image renames the image instead of using default file names (such as img_0001, img_0002, etc.). Up to 8 characters. Press ▲▼to change character, press ent to select 12.5 delete image deletes the image from the hdd and reclaims the space occupied by the image on the hdd. Press ▲▼ to se...
25 12.8 hdd setup 12.8.1 load and copy there are three (3) options in this function: off, synchronous, and load first. Off: disables the load and copy function. No temporary image is loaded to the hddduring the copy process. Load first: completes loading of the image to the hdd then automatically st...
26 Ⅳ. Basic troubleshooting follow these simple steps for quick and proper troubleshooting. 1: power does not turn on or unit receives no power. A. Check power cord and outlet to make sure power connections are secured. B. Check voltage switch on the back of the duplicator to make sure power supply ...
27 a. The duplicator may be busy. Buttons pressed while the duplicator is processing will not perform functions unless otherwise specified. B. Possible faulty button. Contact our technical support department for further information. 6: one of the drives does not open and/or led does not light up a. ...