Ezee TORQ MK II User Manual - Tools Required

9

Tools required 

Tools are the first step to proper assembly,  

you will need a

Allen / Hex key metric set

Philips head screwdriver

Open-end flat wrenches metric 

measurements 6mm - 17mm

Front wheel  

Insert the hub motor wheel into the front fork, 

ensuring that it is properly seated in the dropout slots. Tighten the 

nuts 

alternatively 

on both sides till the wheel is secured. 

Tightening torque

  35 Nm

Seat post   

Insert into the seat tube of the bicycle frame 

and align. Tighten clamps and ensure seat is firmly fastened.

Tigtening torque

16 Nm 

Do not adjust the seat post beyond its maximum extension  

mark.

Headstem   

Align headstem and handlebar so that it is 

perpendicular to the frame before tightening as shown below.

Torq

Assembly

6