Ezquest Cobra Manual - page 10
7
How do I mount My USB Cobra hard Drive?
If your cobra USB Hard drive does not mount immediately after installing the software,
you can open the Hard Disk Speedtools program and click mount after selecting the
desired drive.
How do I create Multiple Partitions?
In order to create multiple partitions, you must reformat your hard drive and select the
number of partitions you wish to create and how large you want each partition. (see soft-
ware manual for more details)
What is the best way to disconnect my drive?
If you are using a PC, click twice on the hotplug icon in the system tray then click “stop
device” before removing the hard drive. If you are using a Macintosh, you need only
throw the Hard Drive icon in the trash before removing the hard drive.
My data is being corrupted when I transfer it to my Cobra USB hard Drive.
Your drive may need to be reformatted. Try to do a low level form at on your drive. PC
users, run scandisk to check for errors.
USB 2.0 Drives will work with OSX without the use of any third party drivers.
To install your USB 2.0 Drive simply connect your drive to your computer’s
USB port and open the Apple Disk Utility (located under applications->utilities)
and erase the disk
.
For updated information check out our FAQ page online.
www.ezq.com
or contact
8 8 8 . 8 9 8 . 8 3 8 0 x 2 1 6