F&V F1 User Manual - page 6
-9-
-10-
Trouble shooting
1.Only display black and white image
AȽPls make sure that the color level settings of saturation brightness and contrast
is proper.
BȽMake sure the panel "COLOR" key color mode was opened.
2.No image after connected to power
Please check whether the AV /HDMI/SDI cable is tightly connected to output
jack,and make sure that you use standard power adopter to the monitor
3.Displaying distorted or abnormal color,as missing certain color
Please make sure that cables are securely connected;broken or loose cable will
send bad signals and make the above problems.
4.Remote controller can’t work
Press button to enter the menu, press the button again to confirm the
selection current Sound mode, press the up or down compared with the option to
change the current mode, press the MENU button to confirm the current option,
press the up or down key was to change The current option settings.
4ȽSoundφ
Volumeφ0—100
MuteφON/OFF
AȽPlease check the correct loading of battery
BȽPlease check whether there are weak batteries or remote signals are blocked
or interfered.