F5 Viprion Manual - page 24
Components provided with the VIPRION AC Platform
When you unpack the VIPRION AC platform chassis, you should make sure that the following components are included.
Hardware
Quantity
power cables (C19 to NEMA 6-20P)
4
mounting brackets
2
mounting handles
4
rack mount screws
8
front bezel (with LCD component)
1
electrical static discharge (ESD) strap
1
Components provided with the VIPRION DC platform
When you unpack the VIPRION DC chassis, you should make sure that the following components are included.
Hardware
Quantity
two-ring grounding terminal lug, 5/8 inch (1.59 cm) holes on 1.25 inch (3.18 cm) centers
1
5/1-18 Keps nuts for the ground
2
terminal block plugs for attaching leads to the platform
2
mounting brackets
2
mounting handles
4
#8-32 FH PH .25 inch black screws
8
front bezel (with LCD component)
1
electrical static discharge (ESD) strap
1
Additional equipment for installing the VIPRION DC platform
The following equipment is required to install the VIPRION DC platform.
Hardware
Quantity
rack-mounted power disconnect
1
AWG copper ground wire
2
AWG copper wiring leads for four power supplies
8 (minimum)
Molex crimping tool for the ground wire
1
screwdriver, #2 Phillips head or flat head
1
24 | Platform Guide: VIPRION | Platform Installation