F5 Viprion Manual - page 26

Caution:  Do not power on a VIPRION platform until the management serial console and/or the management

network is connected to the unit.

Installing the rack mount kit

Before you install this platform, review the environmental guidelines to make sure that you are installing and using the

platform in the appropriate environment.

1. Locate the mounting brackets included with the chassis.

These brackets, along with their corresponding screws, are in an accessory box that is included with the chassis.

2. Attach the mounting brackets to the appropriate location (front, middle, or rear) using a Phillips screwdriver and the

provided screws.

After you install the rack mount kit, you can install the handle kit.

Installing the handle kit

After the rack mounting rails are mounted on the chassis, you can mount the handle kit on the chassis.

1. Locate the handle kit included with the chassis.

These handles, along with their corresponding screws, are in a box included with the chassis. Remove the covers on

the handles if they are installed.

26   |  Platform Guide: VIPRION  |  Platform Installation