Faber The Buzz Installation And User Manual - page 6

L   

5 < 

<

<

<

2.1  Tips for the safe use of gas bottles 

  Gas bottles should always be in an upright position, both while they are in use and 

during transportation. 

  Never take a flame or a burning object near a gas bottle during the installation. 

  Trace leaks by means of a brush with washing-up liquid and water, if bubbles are 

formed you will know there is a leak. 

  Always use a pressure regulator between the bottle and the appliance. Replace the 

pressure regulator every 5 years. 

  Only use approved gas connection hoses. Replace these every two years.  

  Make sure there is always proper ventilation.  

  Close the gas bottle if the appliance is not in use.  

  Leave the filling of gas bottles in the hands of a certified gas cylinder filling station. 

3  Installation requirements 

3.1  Placement of the Buzz 

  Place the Buzz outside on a flat and solid surface. 

  Leave a free space of at least  0,5 m behind the Buzz for operating the controls. 

3.2  Gas bottle and connection. 

Natural gas: 

  The gas connection must comply with locally valid Guidelines. 

  Use a stability chain. This will keep the Buzz from moving and prevent damage to 

the flexible hosing. 

Propane:  

  The gas connection must comply with locally valid Guidelines. 

  The gas bottle should be placed in the space underneath the burner. (See fig. 1.4)