1. DL manuals
  2. Factor Electronics
  3. Speakers
  4. COMM-2
  5. Owner's Manual

Factor Electronics COMM-2 Owner's Manual

Summary of COMM-2

  • Page 1

    Comm-2 two-way active horn speaker / microphone system premium audio videoand power products owners manual info@factorelectronics.Com www.Factorelectronics.Com please read the terms of use below before using this product: this product has the ability to collect audio which may include personal infor...

  • Page 2

    Important note: this owner's manual is provided as an installation and operating aid. Factor electronics does not assume any responsibility as to its accuracy and shall not be liable in tort or contract for any direct, consequential or incidental loss or damage arising from the installation, use or ...

  • Page 3

    Introduction: congratulations and thank you for purchasing factor electronics products. The factor electronics comm-2 is an active all weather horn speaker/microphone. The comm-2 can be connected directly to an ip camera system with one or two-way audio. The comm-2 also provides electronically balan...

  • Page 4

    Comm-2 operation: 1. When connecting the comm-2 with an ip camera system please refer to the camera software to set up the audio in/out. Once the camera software is configured and the comm-2 is connected to the camera you can initiate the talk listen features of the comm-2. 2. When the comm-2 is con...

  • Page 5

    Comm-2 cables & connections: 1. The comm-2 provides electronically balanced line level inputs and outputs. Balanced inputs and outputs reject most of the common noise in audio systems when two balanced devices are connected together. This allows long cable runs to be used without introducing high le...

  • Page 6

    25' to 300' + tip - ring g sleeve pin 1 g/ sleeve pin 2 + pin 3 - + tip - ring g sleeve pin 1 g/ sleeve pin 2 + pin 3 - 25' to 300' comm-2 cables & connections: 5. For installations where the comm-2 will be located 25' to several hundred feet from the connected audio system use balanced connections ...

  • Page 7

    Comm-2 mounting instructions: the comm-2 includes an adjustable swivel mounting bracket that can be used to position the comm-2 at the correct mounting angle for the best performance. 1. Remove the “ mounting bolt” the comm-2 horn will separate from the mount. 2. Position the mounting plate where th...

  • Page 8

    In an effort to constantly provide our valued customers with the latest advancements in technology, factor electronics specifications are subject to change from time to time without notice. Info@factorelectronics.Com www.Factorelectronics.Com 8 8 contact information: factor electronics, 4159 mcconne...