Faderfox micromodul LX1 User Manual - page 10
micromodul LX1
User manual
Page 9
Encoder
The encoder is located on the upper-right of the instrument. It is used to select tracks and slots and
scenes. The LED's to the upper-left on the encode display the current function. Press the encoder to
switch functions.
You can browse through the tracks, send-tracks, and master-tracks by turning the encoder back and
forth. You can carry out a total of 17 different selections.
The current selection is re-sent when the encoder is pressed. This makes sense when you have selected
a different track in the program and would like to go back to the "controller track" in order to view its
insert effect.
The encoder's second function is the vertical selection of slots and scenes (when you are in "session
view" in
Live)
The button
Group offer an alternative method to selecting tracks via the encoder. The corresponding
track or send-track is selected if you hold down the group button in addition to pressing one of the 64
buttons. This is, of course, also dependent on which group is selected (1-8 or 9-16). The master-track
can only be selected by using the encoder.