Faderfox micromodul LX1 User Manual - page 3
micromodul LX1
User manual
Page 2
Provision of guarantee and product liability
The seller warrants for faultless material and proper manufacture for a period of 24 months from the
date of sale to the end user.
Excluded from the stated guarantee are defects on parts as the result of normal wear-and-tear. These
parts are mostly faders (sliding guides), potentiometers, encoders, buttons, switches, and joysticks.
Also excluded from the guarantee are damages that are the result of :
incorrect or inappropriate handling,
excessive force,
mechanical or chemical influences,
incorrectly connecting the instrument with other instruments,
incorrect or inappropriate use.
The warranty is void if the instrument is opened or changed. In addition, there is no warranty for
individual parts and components (in particular, semiconductors) and disposables/consumables. The
seller is not liable for consequential damages which are not the result of criminal intent or negligence
on his part.
The following conditions must be met in order to claim the warranty services:
Instrument is either in its original packaging or similar packaging.
Copy of the invoice with the serial number clearly visible.
Meaningful error report or description of the error is attached.
The buyer assumes all costs and dangers of return shipments to the manufacturer. Since the user’s
manual which is included with each instrument also affects the warranty conditions (especially
regarding safety issues), it is absolutely essential that you read through and follow all instructions.
Safety precautions and servicing
- The instrument's intended use is based on the functions and procedures contained in this manual
- Read all instructions for use as well as all accompanying literature before using the instrument
- Use only in closed rooms (not for outdoor use)
- Never use in a moist or humid environment (laundry rooms, swimming pools, etc, …)
- Not for use in the vicinity of heat sources (radiators, ovens, etc, …)
- Operational temperature is in the range of 0° - + 40° C
- Not for use in the vicinity of flammable material
- The instrument should not be in direct or prolonged contact with sunlight
- Dusty environmental conditions should be avoided
- Only for use with mains adapters which comply with the specifications in the chapter, ”Power
Supply”
- Only for use batteries which comply with the specifications in the chapter, ”Power Supply”.
- Pay attention that batteries do not leak while in the instrument (especially during extended storage)
- When connecting to other instruments, pay attention to the instructions in the chapter, "Connecting to
the computer”
- No foreign objects are permitted inside the instrument casing
- No liquids should get inside the instrument casing
- Never let the instrument fall to the ground (casing and/or control elements may be damaged)
If the instrument must be opened (for example, to remove foreign objects from the casing or for other
repairs), this may only be done by qualified personnel. The batteries must be removed and the mains
cable must be disconnected before opening the instrument. Guarantee is void for defects that occur if
the instrument was opened by an unauthorised or unqualified person.
Use a soft towel or brush to clean the instrument. Please do not use any cleaning liquids or water, so
you avoid any damages to the instrument.