1. DL manuals
  2. Fadini
  3. Controller
  4. Elpro 27
  5. Instruction manual

Fadini Elpro 27 Instruction manual

Manual is about: FOR SLIDING GATE OPERATORS WITH LIMIT SWITCHES, S-PHASE 230V 50/60Hz SINGLE or DOUBLE GATES

Summary of Elpro 27

  • Page 1

    ? 1 on off dip-switch b 1 on off dip-switch b meccanica fadini 27 dis. N. 6893 gb programmatore elettronico con condensatori motore incorporati; idoneo per cancelli battenti a una o due ante, con o senza finecorsa e per cancelli scorrevoli a una o due ante (max. 0,5 cv con frizione meccanica). Via m...

  • Page 2

    Page 13 meccanica fadini gb in case of failure please make sure that - power supply to the electronic control box is 230v ±10% - power supply to the electric motor is 230v ±10% - all of the fuses is all right - the photocell contacts are closed - no voltage drop has occurred from the elpro board to ...

  • Page 3

    Page 14 for sliding ga te systems dip-b n°1=on 27 key-switch: photocells: 1 dip-switch-a n° 1: on: gate is stopped in opening and reversed in closing once cleared from obstacle off: gate is not stopped in opening and is reversed in closing in case of obstacle radio contact (step by step mode): any n...

  • Page 4

    Page 15 for sliding ga te systems dip-b n°1=on 27 meccanica fadini gb 27 universal electronic control box single-phase 230v 50/60hz safety edges ja accessory electrical connections led indication l10 normally alight: whenever the safety edge is engaged, the led goes off ja 1 2 8,2k resistive safety ...

  • Page 5

    Page 16 for sliding ga te systems dip-b n°1=on 27 meccanica fadini gb 27 universal electronic control box single-phase 230v 50/60hz electrical connections on sliding gate mode - dip switch b n°1=on 230vac output flasher max 25w flasher 230v: 23 22 l'apricancello dip-switch-a n°4 and n°10: on: pre-fl...

  • Page 6

    Page 17 for sliding ga te systems dip-b n°1=on 27 meccanica fadini 27 universal electronic control box single-phase 230v 50/60hz electrical connections on sliding gate mode - dip switch b n°1=on red yellow green power supply 230v 50hz red yellow green red yellow green 1a fuse common 63 64 65 66 60 6...

  • Page 7

    Page 18 for sliding ga te systems dip-b n°1=on 27 meccanica fadini gb 27 universal electronic control box single-phase 230v 50/60hz automatic / semi-automatic: automatic cycle: by one pulse from the open command the gate opens and stops in dwell mode for the time as pre-set on the dwell trimmer. Whe...

  • Page 8

    Page 19 for swinging ga te systems dip-b n°1=off 27 dip-switch a 1 = on photocells stop gate in opening 2 = on radio, no reversing in opening 3 = on automatic closing 4 = on pre-flashing in service 5 = on radio step-by-step 6 = on traffic lights mode limit switches connected on off 1 2 3 4 5 6 7 8 9...

  • Page 9

    Safety edges page 20 for swinging ga te systems dip-b n°1=off 27 meccanica fadini 27 universal electronic control box single-phase 230v 50/60hz ja accessory electrical connections led indication l10 normally alight: whenever the safety edge is engaged, the led goes off ja 1 2 8,2k resistive safety e...

  • Page 10

    Page 21 for swinging ga te systems dip-b n°1=off 27 meccanica fadini gb 27 universal electronic control box single-phase 230v 50/60hz accessory electrical connections dip - switch setting and led indication of functions board power supply 230v: neutral live 24 25 electronic control board power suppl...

  • Page 11

    Page 22 for swinging ga te systems dip-b n°1=off 27 meccanica fadini gb 27 universal electronic control box single-phase 230v 50/60hz accessory electrical connections led indication of functions red yellow green power supply 230v 50hz red yellow green red yellow green fuse 1a common 63 64 65 66 60 6...

  • Page 12

    Page 23 meccanica fadini gb for swinging ga te systems dip-b n°1=off 27 universal electronic control box single-phase 230v 50/60hz 27 3 dip-switch-a n°3: re-closing by passing across the photocells: in opening and dwell cycles (dip-a n°3=on) gate is automatically closed after 3s from passing between...

  • Page 13

    La ditta costruttrice si riserva di apportare modifiche al presente libretto senza preavviso via mantova, 177/a - 37053 cerea (verona) italy - tel. +39 0442 330422 r.A. - fax +39 0442 331054 e-mail: info@fadini.Net - www.Fadini.Net ® s.N.C. Prima dell’installazione da parte di personale tecnico qual...