Fagor 2MF-2VGX Installation - Use - Maintenance - page 8
8
I
GB
F
L’elemento riscaldante attiguo
al simbolo
è collegato ad
un TIMER programmabile
sino a 99 minuti agendo sui
simboli
corrispondenti.
Un segnale acustico
avverte l’avvenuto termine del
tempo programmato.
4 - Sicurezza della
programmazione
elementi riscaldanti
e del timer
Si effettua ponendo il dito
sul simbolo
.
Si accende il led C e
quanto predisposto rimane
protetto contro eventuali
manovre errate.
Lo sblocco avviene
ritoccando il simbolo
.
In ogni caso quando
vengono toccati anche
involontariamente due tasti
dello stesso
elemento riscaldante
(questo anche in caso di
travasamento di liquido che
interessi i due tasti) la
programmazione si sblocca,
gli elementi riscaldanti si
spengono e appare la scritta
INIT che si elimina
toccando il simbolo
.
Elementi
a doppio circuito
Per attivare il secondo
circuito, premere il tasto
del simbolo (+) per portare
il livello di cottura a 9,
quindi continuare a
premere il tasto del simbolo
(+) fino a che non si
accende la spia E
corrispondente. Il secondo
circuito resterà attivo per
tutte le regolazioni dal
numero 9 al numero 1.
Per il disinserimento
portare la regolazione a 0
(zero).
next to symbol
is
connected to a TIMER
which can be programmed
for up to 99 minutes by
operating the corresponding
symbols
. An alarm
will ring when the
programmed time has
elapsed.
4 - Heating
elements
programming safety
and timer safety
The safeties are turned
on by pressing symbol
Led C will switch on
and the selection made
will thus be protected
against any faulty
operation.
To unblock press again
symbol
.
In any case whenever
two keys
of the
same heating element
are accidentally touched
at the same time (or
whenever liquids are
split over the two keys at
the same time) the
programmed selection
will deactivate, the
heating elements will
switch off and the
writing INIT will appear,
which can be turned off
by pressing symbol
.
Double-circuit
elements
To switch on the second
element, press the + key
until cooking level 9 is
reached, then continue to
press the + key until
LED “E” lights. The
second element stays on
for all settings between 9
and 1.
To switch the second
element off again, reset
the cooking level to 0.
ve près du symbole
est
connecté à un minuteur pro-
grammable jusqu’à 99 minutes.
Pour effectuer la programmat-
ion, appuyez sur les symboles
correspondants. Un
signal acoustique annonce que le
temps programmé s’est écoulé.
4 - Securité de la
programmation des
éléments de chauffe
et du minuteur
On branche les sécurités
en touchant le symbole
.
Le led C va s’allumer et la
sélection éffectuée sera
protégée dans le cas de
fautes eventuelles.
Touchez à nouveau le
symbole
pour le
débloquer.
En tout cas si par
mégarde l’on appuye
simultané-ment sur deux
touches
du même
élément de chauffe (ou si
du liquide déborde sur les
deux touches en même
temps) la programmation
s’arrêtera, les éléments de
chauffe s’éteigneront et
l’inscription INIT
apparaîtra. Pour l’effacer,
touchez le symbole
.
Eléments
à double circuit
Pour activer le second
circuit, appuyer sur le
symbole (+) pour amener le
niveau de cuisson à 9 puis
continuer à appuyer sur le
symbole (+) jusqu’à ce que
le led E correspondant
s’allume. Le second circuit
restera activé pendant tous
les réglages entre 9 et 1.
Pour désactiver le second
circuit, amener le niveau de
cuisson à 0.