Fakir KT 83 Instruction Manual - After Use
GB
AFTER USE
• Should the appliance switch off before reaching boiling
point this is a sign that decalcifying is necessary.
• Cover the heating elements with vinegar and water (2/3
water and 1/3 vinegar),Boil 2 or 3 times. Pour out the water.
• Do not fill the kettle to the upper mark to avoid spillage if
the descaling agent causes the water to foam .
• To clean the kettle thoroughly of any decalcification
residues let it go through several boiling cycles using clean
water with each cycle , Rinse the kettle with clean water
afterwards.
16
Decalcifying
• Before cleaning the appliance, ensure it is disconnected
from the power supply and has cooled down completely..
• Do not use abrasives or harsh cleaning solutions.
• Do not immerse the base or the kettle in any liquid, to
clean the exterior, a slightly damp, lint –free cloth may be
used.
• It is advisable to remove lime deposits from the kettle at
regular intervals.
Cleaning and Care