Fakro ZWK10 User Manual - Declaration Of Conformity
1 5
ZWK 10
Declaration ofConformity /Warranty
Warranty
The manufacturer guarantees correct device functioning. It also undertakes to repair or
replace the device if its defects result from material or structural faults. The warranty period is 24
months from the purchase date, fulfilling the following conditions:
• Installation has been performed by an authorised individual, as per manufacturer
recommendations.
• Seals remain intact and no unauthorised structural changes have been made.
• The device has been used in accordance with its intended use as per user manual.
• Damage is not a result of improperly made electrical system or atmospheric phenomena.
• The manufacturer is not liable for damage which occurred as a result of improper use or
mechanical damage.
In case of failure, the device must be submitted for repair with a Warranty Card. Defects
revealed within the warranty period will be removed free of charge no longer than 1 4 days after
accepting the product for repair. Warranty and post-warranty repairs are performed by the
manufacturer i.e. FAKRO PP. Sp. z o.o. .
Quality Certificate:
Device
Model......................................................................
Serial Number.........................................................
Seller.......................................................................
Address...................................................................
Date of Purchase.....................................................
.............................................................
Signature (stamp) of installing person
Declaration of Conformity
in accordance with directive 2006/95/EEC
We FAKRO Sp. z o.o., 144a Węgierska St. declare that the product - ZWK10 controller:
•
is compliant with the requirements of 2004/108/EEC directive concerning electromagnetic
compatibility;
•
is compliant with the requirements of 1999/5/EEC directive concerning radio devices and final
telecommunication equipment and mutual recognition of their conformity;
•
is compliant with the requirements of 2006/95/EEC directive concerning electric equipment
designed for use within certain voltage limits;
•
has been manufactured according to harmonized standards PN-EN 300220-2, PN-EN 301489-3, PN-
EN 55014-1, PN-EN 55014-2, PN-EN 60335-2-97, PN-EN 60335-1;
12 - 04 - 2014
Sp. z o.o.