Falco Systems WMA-02 User Manual - page 6
of
8
0pF
100pF
470pF
1nF
2.2nF
10nF
Figure 7. Full-power 1kHz square
wave response with different
capacitive loading conditions. The
50kΩ output resistor limits the speed
at which the capacitor can be
charged.
Figure 8. Triangle wave 350V
pp
1kHz
Figure 9. Sine wave 350V
pp
1kHz
Figure 10. Noise (less than 9mV
peak-peak or, equivalently, less than
4mV rms) and typical offset (0.8mV)
for the WMA-02. The high voltage
generator frequency (around
150kHz) contributes considerable to
the overall noise. Loading with 1m of
coaxial cable.