Falcon 1092 User's Manual & Installation And Servicing Instructions - page 29
Other manuals for 1092:
User's Manual & Installation Instructions
of
36
29
Refit the pan supports.
Reassemble in reverse order.
Stick on label
Stick the appropriate label on to the data badge to
indicate the gas the appliance is now set for.
Pressure Testing
Connect the appliance to the gas supply.
Check the appliance is gas sound.
The gas pressure can be measured at the pressure test
point on the gas inlet. Turn and light one of the hotplate
burners.
Check operation of all the burners.