Falcon electronics 1080p dvr dash cam instruction manual part #: 2fe1080peecam.
General dash cam overview: 1) up button 2) menu button 3) down button 4) usb data interface 5)hdmi slot 6) power button7)microtf/memory card slot 8) hold/lock (sos) button9) mode selection button10) ok/confirm button 11) ir led light 12) speaker 13) reset button description of function keys: 1) up b...
Special function description 1. The g-sensor function: when the gravity acceleration up to 6g (1g = 9.80 m / sec 2), the machine will automatically protect the current video file where the acceleration was detected. The continuous loop recording will not delete this video file where the g-sensor act...
Battery charging instructions there are three ways to charge the battery, the red charging indicator light will be lit in the charging process, the charging time is about 180 minutes, the red charging indicator light will automatically switch off after the charging is finished. 1)use the power adapt...
Note: using this product improperly can cause it to crash. In the phenomenon of it crashing, you can disconnect the battery or press the reset button before turning on power to return it to normal. Package list falcon 1080p dash cam usb charging/data line dc mobile charger 8 gb sd card heavy duty wi...
Falcon electronics limited warranty what warranty covers: manufacturer warrants to the original purchaser that the product furnished hereunder shall be free from defects in material and workmanship under normal use and service. In the event of any defect in material or workmanship, the manufacturer ...
