Falcon 2FE1080PEECAM Instruction Manual - page 4
Battery Charging Instructions
There are three ways to charge the battery, the red charging indicator light will be lit in the
charging process, the charging time is about 180 minutes, the red charging indicator light will
automatically switch off after the charging is finished.
1)Use the power adapter to charge 2)Use the PC-USB cable 3)Use the vehicle power charger
Specifications
Product Name
EagleEye 1080P DVR DASH CAM
Part Number
TDEE1080CAM
Features
High-definition camera, High-definition video
Color
Black/blue
G-sensor
Built-in (car accident case of emergency save, will
not be deleted)
LCD screen size
2. 7LTPS
Camera
140 A + grade high-resolution ultra-wide-angle lens
Language
Russian, Japan, France, Italy, Germany, Western,
English, Chinese (simplified), Chinese (Traditional),
Korean Etc.
File Format
AVI
Video resolution
Maximum 1080P
Video formats
M-JPEG
Color effects
Standard
Continuous loop video
Seamless looping video, do not drain seconds
Truck switch machine
Support auto ignition boot, turn off shutdown
Motion Detection Function
Support
Date of hours
Support
Carrier media
Built-in Memory (total: 64MB)
The camera mode
5 million
Photo format
JPEG
Memory card
TF (up to 32GB)
Microphone
Support
Built-in stereo
Support
Infrared night vision
Support
Video output
AV
Video Format
PAL / NTSC
Current frequency
50HZ/60HZ
USB function
1 : USB-Disk 2: the PC-Camera
Power Interface
5V 800ma
Battery
Built-in 300mAh