Falcon G31225 User Instructions

Other manuals for G31225: User Instructions

Summary of G31225

  • Page 1

    G3625, g3925, g31225 and g31525 chargrills g3625, g3925, g31225 and g31525 es chargrills users instructions section 1 - general description section 2 - lighting and operations section 3 - cooking hints section 4 - cleaning and maintenance the appliance has been ce-marked on the basis of compliance w...

  • Page 2

    Section 2 - lighting and operations 2.1 setting the radiants before using unit each day, ensure radiants are set in the proper positions as shown above. If radiants are not in position shown, branding iron temperatures will not be spread evenly over cooking area. To reposition a radiant, simply remo...

  • Page 3

    2.5 turning the burner off refer to figure 2. Proceed as follows:- for short periods to turn off burner leaving pilot lit, push in knob and turn it clockwise to pilot position. For long periods e.G. Overnight to turn off burner and pilot, push in knob and turn clockwise to off position. Note every t...

  • Page 4

    Figure 3 - g3625 panel layout figure 4 - g3925 panel layout figure 5 - g31225 panel layout figure 6 - g31525 panel layout lh lighting hole rh lighting hole lh control rh control lh lighting hole centre lighting hole rh lighting hole lh control centre control rh control lh outer lighting hole lh ligh...

  • Page 5

    Section 3 - cooking hints when cooking, the operator has three options which can effect the cooking performance of the food. These are:- temperature setting high (maximum power) to low (minimum power) position of branding bars the rear of the bars can be set low or can be raised to rest on ledge loc...

  • Page 6

    Section 5 - spare parts the following parts may require replacing during the life of this appliance. Spark ignition lead pilot burner assembly (natural gas) pilot burner assembly (propane gas) thermocouple when ordering spares, please quote the following information:- appliance type serial number ga...