Falcon G3830 User Instructions

Other manuals for G3830: Installation And Servicing Instructions

Summary of G3830

  • Page 1

    G3830, g3860, g3865 fryers users instructions section 1 - general description section 2 - lighting and operations section 3 - cooking hints section 4 - cleaning and maintenance this appliance has been ce-marked on the basis of compliance with the gas appliance directive for the countries, gas types ...

  • Page 2

    Section 2 - lighting and operation a 20 second delay (approx.) will occur between establishing a pilot flame and burner ignition. Operating the fryer the unit will operate automatically with burner going out when desired temperature is reached. No further operation of control knob is necessary until...

  • Page 3

    Lighting the burner warning after turning off pilot for any reason, wait at least 5 minutes before attempting to relight. Ensure pan is filled with cooking oil prior to lighting. Thermostat must be turned off (fully anti-clockwise). A 20 second delay (approx.) will occur between establishing pilot f...

  • Page 4

    Cooking charts with the exception of potatoes, fried food is generally coated with one of the following : milk and flour, egg and crumbs, batter or pastry i.E. Whitebait, potato croquettes, fillet of fish, samosas. The coating helps to protect a food item from hot oil. A variety of different food ca...

  • Page 5

    The use of flammable solvents for cleaning must be avoided. Take care not to damage thermostat boss or tubes located within stainless steel guards when cleaning. These are positioned immediately below fishplate at front and side of fryer pan. Never search for a gas escape with a naked flame. Service...