Falcon G3830 User Instructions - page 3
Lighting The Burner
Warning
After turning off pilot for any reason, wait at least
5 minutes before attempting to relight.
Ensure pan is filled with cooking oil prior to lighting.
Thermostat must be turned off (fully anti-clockwise).
A 20 second delay (approx.) will occur between
establishing pilot flame and burner ignition.
The pilot has to be lit using the following procedure:
a) Push control knob in and turn to pilot position.
(See Figure 1)
b) Continue to hold knob in. Press igniter fully in and
release, the spark should light pilot. If pilot does not
light, continue to press and release igniter button until
pilot lights.
c) When pilot is lit, hold control knob in for 20 seconds
then release.
d) Check pilot remains lit. If the pilot is extinguished when
knob is released, wait at least 3 minutes before
repeating from Step 1.
Main burner may now be lit as follows :
a) Light pilot as above and wait 30 seconds.
b) Set thermostat to 190°C.
c) Turn control knob to BURNER ON position (Figure 1)
and check burner lights.
d) Having lit burner turn thermostat to required setting
if other than 190°C.
To Turn Main Burner OFF
Return control knob to pilot position (Figure 1).
This will extinguish main burner whilst leaving pilot lit.
To Turn Pilot Burner OFF
Push control knob in and turn to OFF position. (Figure 1)
Heat-Up Time
It takes 10 - 15 minutes to reach 190°C frying
temperature from room temperature.
SIT Nova Multifunctional Control
Figure 1
Control knob
Off position
Pilot
position
Burner on
position